slim2fattycake

Your sub is dual 2 ohm so you have to wire to 4 ohm to the audiopipe ap30001d for 2000 watts. Or you could spend a little less for the ap18001d and get 1800 watts at 1 ohm. You won't hear the difference between 200 watts.

That is the breaker of the system. Either learn to build a good one or find someone who can. I don't know if I would trust the shop that doesn't sell the product you want an enclosure for.

dude, where is the build log? lol

god damn. loving the excursion.

weakass

You need to trash that ohio gen and get DC Power alts.

If I was given 4 T2s, I'd still sell them bitches and put the money to to the BTLs.

but what are you trying to do with this setup?

I'd get the T2 and sell it so I can get another BTL. Yous going to downgrade if you get the T2.

Seriously, asshat. This thread is over a year old.

dude please resize the images smaller. Its taking forEVA to finish loading. Good shit otherwise.

hmm, i'd like to see that.

You don't want SQ. face it up instead of down. you'll get more output.

daily, then keep the tuning above 30hz. did you buy the sub yet?

what are you saying?

why don't you have 54mm of xmax anymore? RE's kit is like stock. You may have not aligned the coils right. Its 250 for the recone. I passed.

NICE!

That's always been how I think. Just because an amp goes down further doesn't make it better for some reason. I'm in the process of looking a new amp for my dual .7 btl, and it's either going to do power at 2 ohm, or I'll get two smaller amps and strap them at 2 ohms. get the audiopipe ap30001, does 3k at 2 ohms.

Why would you not get an amp to do power at 2 or 1 ohms? Why strain the electricals, sub, and amp more by running it at .5 ohms? That's stupid. For comps for a burp or two is fine but if you don't know what you're doing, don't do it. Also, I think OP should have gotten a 15 but if you bought it already, sorry. I guess you can make it work.

box flex? good? when?

OP, mine opens like the 1st picture. No problems yet. I have done low to mid 40s.

*throws up in mouth* Depends on your needs, goals, power, etc. I'd never use something that thin, but I know bassheads who will disagree. Different goals. They don't list the thickness...You could send them an email and ask. the port can be trimmed to change tuned frequency (nice addition, not just tuned at 45hz and there you go). Edit after further reading, I think that box is good for a low powered subwoofer, but an Icon on a 1000watts is gonna tear that apart. HUGE problem with that box. It is 1.25cuft which is enough for a SEALED Icon. No way, no how will anything sound good in it. If you have to use it, seal the port and call it sealed. Port tuning is also seriously shit in that enclosure and not made for a "real" sub. It won't get torn apart if it is truly mdf, but I still don't recommend it for anything I'd own. Why? Edit- why would bassheads use thin panels? Never heard of bassheads using thin panels for their box. Bassheads double up.

old aq 3500 is but not the newer 3500.1s

You know your AQ2200 is "china chink slap ass special" right? And I'm thinking you are talking directly to me since I am a "chink". Why don't people understand you can get quality from china? Its the companies that don't wanna pay for quality that you should point your finger at not the Chinese build houses. They do what their paid for.

2 AQ20k under $3k. 5k per sub. But I really would rethink this if you are not knowledgeable about car audio. This is a lot of power and work.