DB_DRAG_SPL

Here's some of my older stuff, I'm getting ready to pick up a new Nikon D80 and a butt-load of new glass so hopefully I can get out and shoot some this spring/summer:

Yep, got here Friday. We've got a couple guys coming by the shop in the morning who were interested in buying, they just wanted to hear and check out the build on them, so needless to say, I should have a few oreders coming your way this week!

Got my pair of 12" LvL 3's on Friday to demo out and test. All testing was done on music with our Term-LAB, ABSOLUTELY NO tuning whatsoever in a box we had in the shop. Vehicle specs: '02 Jeep Liberty Electrical: 160a Alt Optima Yellow Top up front Big 3 Single Batcap 800 in back, will be banked w/ 2 more in following tests Enclosure: Ported 4cf internal airspace after displacement box tuned to 32Hz Subs/port both facing rear Subwoofers: (2) LvL 3 DC Sound Lab 12"s DVC 4ohm Amplifier: (1) Sundown Audio SAZ-1500 @ 1ohm Results: Best score on Music was 143.5db, peaked in the 50-52hz range. Let me remind you, this was a very preliminary test, once we get an enclosure built to what we'd like (were going high 20hz), and the other 2 batcap 800's banked up in order to throw some more voltage @ the Sundown, we're hoping on somewhere in the range of 145+db on music, more on test tones. We haven't had the ability to throw full power at them either due to break in period, these have alot still to give! I'll have video up tomorrow once I get back to the shop in the morning.

In WV, but i'm only about 3-4 hours away from Roanoke.

Glad that you finally got them. My set should be here within an hour and a half and will be going on the Term-LAB this afternoon!

Looks good, I'll be there in the Jeep!

KILLER deal here guys!!!!!

He used a CNC machine

You do realize that a SAZ-1500 @ .5 ohm w/ the electrical we're putting to it will put out in excess of 2000w correct? I was refering to his amp with 1500-1600 to share between the two, not the one you mentioned... Sorry for the confusion... Ah I see now, my bad.

You do realize that a SAZ-1500 @ .5 ohm w/ the electrical we're putting to it will put out in excess of 2000w correct?

Were running 2 12" SSD's on a SAZ-1500 @ .5 ohm and they get LOUD and take it all say long, not even the slightest smell of a warm VC. They did a Term-LAB verified 145.3db on music.

Not a problem, just let me know when you get the site confirmed. All I'll need is access to a power source.

BTW, muddy, i'll get that decal mailed out to you tomorrow morning

Brace team...

If I come, i'll bring my TL and meter for free.

We have a customer w/ 2 12" SSD's running a SAZ-1500 @ .5 ohms with no problems

0ga wire from Alt to Batt, Batt to Chassis, Engine Block to Chassis

I have a medium sized Fi decal I bought off someone over on SMD, it's not HUGE, but you can have it if you want it. Just PM me your shipping address.

You all might be wondering why I would post this in the Fi section, so i'll just let the pictures do the talking: So far, all panels have been cut and port areas have been painted. The plexi front panel will have a Fisher Custom logo CNC machined on it as well. To follow the build over on CA.com: http://www.caraudio.com/forum/showthread.php?t=284556

mmm, keep me updated on the 2000's jake, I want one!

Thx Jake, once this one comes in, it's time to strap!!

Placed an order for another SAZ-1500 this morning! Nothing but the best from Jake and the Sundown Team!

PM me when you get a chance Fi, your PM box is full!

I need a price on 4 X's ASAP. Cash in hand ready to go. I'll be PMing you Fi

If my buddy has any more material I will have him make you one. I don't charge for them, I do it to support Sundown. Sundown has been good to me. Jacob!!! However if I have to ship it I would ask that you pay the actual shipping. Jacob sign me up for a 4XL t-shirt. I think you should keep it simple and do black shirts with Sundown Audio in gray like the amps. Sounds good man, just keep me updated. I don't have a problem paying shipping and sending him a few bucks for his time.