FiBl15

how much would a recone for my 18 to a ten cost me? D2 no options

how much would it cost, if i was only a mosfet, or the board?

yeah thats it

is it possible to fix a blown mosfet on a saz-3000d? if so how would i go about it and how much would it cost. i found one for sale and was wonderin if it is fixable

not yet. Since 1 1/2'' of the wire is inside of it and soldered it doest budge

yeah the i left the threads in there for more surface area for the solder to hold to.

ok here are some pics. as you can see in this first pic, there are three or so nuts welded together. then on one end i took a bolt that is the same size as 4 guage and welded it into the end. then i laid some beads with my welder all the way around the nuts and then smoothed it all with hand grinder with a flapper disc

gimme a sec and ill post some pics

thats what i thought. i did that and it read the exact same with and without it

Ive talked to a few people and they think it will add resistance. how would i measure that?

I have made similar connectors and dipped them into rubberized tool coating. black electrical tape works for now

i havent thought of anything yet probably try some bed liner or somethin of that sort

not that much time, took 30 minutes to make two of them. I know you can buy them, id rather build something my self for cheap, than pay more for something somebody else made

Got bored yesterday and decided to do somethin constructive. decided to make something so that i could use 1/0 guage on my AQ 1200, the power and ground inputs are only 4 guage

welcome

looks good

yeah i was using a old ghetto camera that cant record with sound. Ill get around to a better one eventually

heres a lil vid. this was the only one i was able to film, my batteries died. anyways tell me what ya think.

no

fudge! you either dropped them really hard or they are chitty baskets

lol x2

ok vids will hopefully be up tomorro. i did the biggi 3 and it helped a lil, needs a nother batt really bad

Too far to drive to test a batt (60 miles) so i think ill hold off on the bat and do the big three instead

i have a couple of batts layin around my house, and i cant tell if they are good or not. THe one reads 9.4 volts, so i hooked it up to the charger, and 5 hours later it stil isnt charged. the other one read something like 4 volts and after 5 min. on the charger it says it is almost full. Are the batts no good, or not. (car bats)

ugly.... the ass end looks kinda like a stang/hybid...weird