vanquish

UPDATE: AUDIO ART *** SOLD ***

It is! One of my favorites. Small footprint with all the power you could need for a front stage (I ran it w/ a 2-way active setup)

SOLD!!!

** NO TRADES ** 1. Product: Digital Designs Audio (2) DD-AW6.5" Midbass (2) DD-AT28 Tweeters 2. Specs: 120w RMS each (They'll handle plenty more just like the other Digital Designs Equipment if you're smart about it and have clean power) DD-AT28 (Frequency range 1,500-30,000hz) http://ddaudio.com/products/mobile-audio/mids-highs/audiophile-series/at28 DD-AW6.5 http://ddaudio.com/products/mobile-audio/mids-highs/audiophile-series/aw65 3. Description/Condition: Designed and Built in Germany! Perfect for a 2-way active setup... IMO they're very warm sounding and aren't fatiguing to the ears. I liked them better than my Focal Polyglass set personally. 9/10 cosmetic 10/10 mechanical 4. Price: : $425 5. Pictures: [br][/br] [br][/br] [br][/br] [br][/br] [br][/br] [br][/br] [br][/br] [br][/br] [br][/br] [br][/br]

Item(s) for Sale: (4) Diamond Audio (WCC Rebadge) Tweeters and crossovers Item(s) Description/Condition: Brand new never powered or used. (if you don't like the sticker you can take it off with a straight edge razor) 10/10 mechanical 10/10 cosmetic Price: 60+ shipping per set Item Pictures:

1. Product: Tru Technology SSLD6i (6ch Line Driver & Conditioner) 2. Specs: http://www.trutechnology.com/products/Archive_Line_Amp/linedriver001.html ^^^^^ 2 in 1 line driver and conditioner! Bur-Brown and many other amazing components like the rest of the Tru Technology lines Cleaned up my signal path just as advertised. 3. Description/Condition: see above 10/10 condition 10/10 working 4. Price: : 130$ shipped 5. Pictures:

1. Product: Audiocontrol LC6i 2. Specs: Maximum Speaker Level Input: 400 watts Maximum Output Voltage: 9.5 volts RMS Frequency response: 10Hz-22kHz THD: 0.01% Input Impedance: 20 kΩ 3. Description/Condition: High to low converter for factory vehicle installs 10/10 condition 10/10 working 4. Price: : 120$ Shipped 5. Pictures:

*** NO TRADES!!!!!! *** Item(s) for Sale: 1. Arc Audio KS-500.1 2. Arc Audio 4150 CXLR 3. Arc Audio 2300 SE 4. Alpine F6 5. Digital Designs C1a 6. Kenwood KAC-720 7. Audio Art 200.2 8. A/D/S Power Plate 100 9. MTX Thunder 250 Item(s) Description/Condition: (1) 10/10 Cosmetic 100% functional (Comes with Bass Knob... 450x1 @4ohm, 600x1 @2 & 1ohm) (2) 6/10 This amp has definitely seen better days but works 100% because it's built like a tank (90x4 @4ohms and UNDERRATED forsure) (3) 9/10 Cosmetic 100% functional (330x2 @4ohm, 650x2 @2ohm, 1300x1 @2 & 4ohm) (4) 7.5/10 Cosmetic 100% functional (150x4 @2 & 4ohm, 300x2 @4ohm) (5) 7/10 Condition 100% functional (2x100 @4 ohms, 1x200 @2 ohms) (6) 10/10 Condition on each... One is 100% Working the other is powers up but there is no output I'll throw it in for almost free (45x2 @4ohm) (Made in Japan) (7) 6/10 Cosmetic 100% Functional (200x2 @4 & 2ohm, 400x1 @4ohm) (8) 7/10 Cosmetic 100% Functional (75x2 @4ohm <.01% THD) (9) 9/10 Cosmetic 100% Functional (250x1 @4ohm & 400x1 @2ohm) Price: 1. Arc Audio KS-500.1 ... $260 2. Arc Audio 4150 CXLR .... $250 obo 3. Arc Audio 2300 SE ... $900 4. Alpine F6 .... $350 5. Digital Designs C1a ... $125 6. Kenwood KAC-720... $65 7. Audio Art 200.2 ... $65 8. A/D/S Power Plate 100 ... $75 9. MTX Thunder 250 ... $100 Shipping and Miscellaneous Item Information: PM me Item Pictures:

Umm That's not how this forum works

something about the E.L.D. re-adjusting as to why it ran horrible on first startup i'm going to drive it around and see what happens.

I checked the exposed fuses with a dmm for continuity they read fine. I didn't however unplug the massive fuses under the hood.

no that should be located way in the back of the engine. Theres a green alternator plug that I unhooked but plugged that back in

It's not stuck on if that's what you're asking but yes all the dash lights work

yeah not happening. starting to regret attemping this big 3 ;(

2004 accordI unplugged the alt and unhooked the battery that's all. everything is back where it was with factory wiring and all

The factor ground from the negative battery terminal is still there in the second picture. Do you mean remove the new grounds and see what happens? Will this be ok to start the car without those two grounds

Hooked up the big 3 and first time start up the car was running really rough rocking like crazy, something is wrong. Started it again this time it ran fun but The speedometer stopped work!? wtf did i Do Charges @ 14.2 so the alt is working Neg -> Frame Neg -> engine block Pos -> Alt

bnib 250 shipped. pm me

ttt

Thank you I wish I had a tablesaw to make more precise cuts but with the tools I have it didn't come out to bad. The router bit is a "3/4" roundover" if you ever want to try it yourself.

Not much of a log but I took some pictures along the way. I will say this sounds great and the low end really surprised me a single 8" setup. After a little break in I'll hook up the Digital Designs DD-C2a bridged @2ohms. Shout out to John23a for the design help. Enclosure is .7 @33hz Onto the pics:

Both are around .75ft^3 @ 35hz One has 1.25" Port The other has a 1" Port BOX 1: single sa8v2 @35Hz: Enclosure Specifications: Fb = 35.3 Hz Vb = 0.72 ft^3 External Height = 10 in External Width = 22 in External Depth = 12 in Port Width = 1 1/4 in BOX 2:

I'm having this same dilemma.