Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

SeductiveSounds

Members
  • Joined

  • Last visited

Everything posted by SeductiveSounds

  1. Do you have maunal or power locks? Depending on which you have will depend on how you get keyless entry. If you have power locks, you're set no need to add anything except maybe 2 relays. If you dont have power locks, I'd suggest a pair of door lock actuators (1per door) as they have the ablity to lock and unlock the doors. Simple solenoids only work in one direction (Door poppers for example) Where I work we charge $75/door (CDN) and that includes the actuator and the relays. Hope this helps
  2. Built the box. I beleive that the tuning is lower than we had calculated. Output is fantasic. I'm very impressed with the FI.SSD's output, clarity, and build quality. I'm looking forward to getting the BTL's for myself. TL results - 139.31dB @ 36hz, 138.53dB with music Not bad at all for a single 12 with only 600watts RMS to it.
  3. So lets say I have the potential to draw 700amps with my system, If I have 1 battery under the hood and 3 more in the trunk, a run of 3/0AWG wire front to back, how do I fuse it? Last time I checked the largest ANL fuse was 300AMP How do you guys with monster systems do it? other than multiple runs of power wire.
  4. I like the Compustar personally. However Viper and Clifford offer up some great solutions. Definately get something with 2-way communication.
  5. Dual alt will never happen, I am not willing to loose the a/c (far too humid) H/O alt is going to be the most difficult piece of the puzzle. I drive a 2003 Nissan Sentra SE-R SpecV, and I have yet to find anyone that can do one for me. Any leads? Space isnt that much of an issue, I just deal with a small mom&pop shop that are helping me out with wire and kinetic batts @ cost (been dealing with them for years) so i cant really pass up the deal. You guys are awsome, I love how quickly everyone on this board is to answer my somewhat silly questions. but then again the only dumb question is that one thats not asked. On a side note, is the SAX-100.4 under rated as well? I like all my amps to match, just call me crazy
  6. so you'd suggest getting 2 SAZ-3000D and do it that way then? And will the electrical upgrades I have planned work out ok?
  7. How safe is it if I was to run pair of BTL15D2's @ 0.5ohm with music? I'm only able to buy one amp at the moment. I will be getting another as soon as I can, then I'll strap them @ 2ohm I dont know much about calculating imp. rise or anything like that, nor do I have the tools. This is honestly the largest system that I've ever done. thanks. I will be doing electrical as well support the planned power. H/O alt if and when I can find one 3 or 4 Kinetik hc2000
  8. This box is for a 93 civic coupe. How does it sound? and does it loud? I'm thinking the lower tuning will improve the sq and get lower We currently have the sub in a 2ft^3 @ 36 hz, but he's wants something that fits a little better and uses the trunk better
  9. sweet, so everything is good to go then? everything matches up to what I want? out of curiousity, why do i want the sub to be closer to the port opening on the front? does it have something to do with port loading? if it does, could someone point me in the right direction to understanding this phenomena? thanks
  10. Something like this? I will also round off the edges of the port and 45's in all the corners
  11. I have modeled up a box for a 12" Fi.SSD Now I'd just some of you box builders to just verify what I've done. And let me know if its good or not Here is a pic since they're worth 1000 words: Port and Sub displacement has been accounted for. Where would be the best location on the port side to place the sub? I dont quite understand port loading and such. Thanks in advance
  12. I've emailed them at least 5 times I've NEVER recieved a reply
  13. Would anyone happen to know where I'd be able to get soft parts/recone kits for 3 Soundstream Exact10's? I've had these fantastic subs for a few year, blown, figuring one day I'll get to use them again. So I am looking for either soft parts that'll fit or someone that could recone them from me thats local (Toronto, Canada) Thanks in advance.
  14. Nothing yet, not a word. And I know nick has been online today since I last posted in this thread, twice that I know of. Online line as of right now too. (pm sent) My email is stephen "@" seductivesounds.ca just incase its ended up in your spam folder. Oh and if I dont hear anything by tomorrow night I will be placing a dispute with paypal so I can get a refund. And I might possibly start over. Thanks
  15. Ok so I sent the funds via paypal. Forgot the coil config, emailed about it. but now I'm still waiting on some sort of communication from someone at Fi as the where abouts of my sub. My payment cleared may 1st and well ya I'm still waiting I know the guys are busy with the BTL release, but why knock the little guy I sent off an email to Nick this morning at 10:10:49 AM (EST) So hopefully this is resolved by the end of the week. Ideally I'd like to get this sorted over the phone. I've emailed my evening phone number to nick "@" ficaraudio.com (05:19:47 PM) As email isnt the easiest way to do it.
  16. SeductiveSounds replied to lilyo's topic in Fi Products
    I believe that this is the information to which you seek: http://www.soundsolutionsaudio.com/forum/i...?showtopic=7156
  17. I have the IVA-D310 and the PXA-H701 Never had any issues at all with it, its flawless. No wait I take that back, the only thing I dont like about the combo I have is: Should I want to use the time alignment, I have to enter it manually. But with the RUX-701 controller, I can do it automatically with the supplied mic. If you dont what to get the screen or an Alpine deck you'll have to use the RUX-701 controller.
  18. No but i have now lol thanks
  19. Paypal is the gay I cant use my credit card to pay, i have to use my bank account, wait 6-8 business days for the payment to get to Fi then wait another 2 weeks for the sub, man thats a long time
  20. Really? No one can help me out? I want to place an order and pay for a sub and shipping. But I just cant do it off the website. Should I just email them or what?
  21. check all of your connections, both inside and outside the box also, try testing the output on the amp with a known working speaker.
  22. I'd like to make an order for an SSD for my co-worker. Now the thing is I cant order off the website, so how can I order it? I know how much it is, I've got the shipping quote I just need to make the order and send payment. How do I do it? Thanks
  23. almost 10days waiting on pics thats longer than some other things worth waiting for
  24. +1 I was about to order a pair of 15 BTL's and then I couldn't even see them on the site. No now I must wait another month, I had finally convinced the bank (aka wife) that I needed new subs.
  25. Are they safe to run @ 0.5ohm for daily use with music? or am i on cheap crack?

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.