NDMstang65

hush you. Why aint you in the blue man group with the rest of us?!

Sales"at"ficaraudio.com is the paypal address.. What recone do you need? (hixmax, or standard dual 2) Also where are you located so we can calculate shipping to you. Thanks -Nick

On my list to check with Scott today... Thanks -Nick

Just another day in the life of Meade Awesome man!

Not so much that, it also has a lot to do with the OD of the coil... The fast majority of our coils will set on the top plate of other manufacturer's coil's... Aside knowing where that was built, i'm almost 100% positive we don't have a coil that will fit... Thanks -Nick

Nope...sorry man

You'd probably hear some noise...but at that level of loudness unless you have your head close to the sub you shouldn't hear it...

Try to glue it with the windshield adhesive, if that doesn't work your only out a few bucks...instead of ~90 for a recone..

nick have small splz.

I doubt very seriously if Scott will send out loose parts... Recones built for specific subs sure.

Awesome! Should have gotten some vids!

So long as you stay within our guidelines you should be in good shape. The larger box gets the more prone to low end response and 'boomier' it will tend to sound... Thanks -Nick

Go get a tube of urethane based windshield adhesive.. Put a piece of tape on the back side of the surround, fill the hole up with the sealer... Much cheaper then paying for a whole recone Thanks -Nick

It's because they are all in a single chamber... If you divided them you'd get your response curve back...

yep...you'd have to send it in though... Thanks -Nick

Measure the ID and OD of the coil that is in it with a set of calipers... Should be 3.000" ID Thanks -Nick

No clue if it is a standard American 3" coil or not...it could be one of the weird Chinese ones... Thanks -Nick

No those are 4" coil subs as far as i remember... Sorry man -Nick

Not a clue there buddy, you'll have to wait until Scott gets on here, I'll try to get in touch with him today but he generally tries to browse the forum on saturdays. We'll get it figured out. Thanks -Nick

That's a fully loaded with the dual 2ohm gap, (so yes can fit any coil) if he bought it from Beau Boren...that's actually the motor that we used in the great 12 challenge. Thanks -Nick

Yep you can send it in... 30 bucks to re-align it + shipping, of course with the usual scenario of put name address info etc etc in the box you ship it in. Thanks -Nick

Awesome, Thanks man! -Nick

If it is bridgeable at 4ohms then you need to get a dual 2ohm sub and wire the coils in series for a 4ohm load.

I think that amp is bridgeable at 4ohms...and by looking around a bit should do 900 watts or so... Might be a solid amp, i have no experience with it however. Thanks! -Nick

We've got a dual 2 flatwire that will fit that gap....so it'd be $95 Same basic coil, just a little different... Thanks -Nick