gearstix

then what would you use??

I have WinISD "Beta".... not overly sure how to use it, does it give you cutout diemensions?

X2

So the 122000 is a good battery? I will call and see how much it will cost. EDIT... OMG. $672 dollars. Deep cycle optimas are $325 IIRC..

Theres a box tool on this site?

I'd be running a universal 200amp alternator if I can find one, dedicated to the stereo. As far as I know I'll be picking up some of the old heat sink design SAZ-1500ds, two of them, and strapping them.

How man would I need you reckon? 200 amp hours. The Powermaster D3100 "only" has 117 AH. A Kinetik HC 2400 "only" has 128 AH. An Optima Yellow Top "only" has 120 AH, the higher the better. I'm not sure about the MAX amps the 122000 is though... Not how many amp hours I'd need How many batteries Oh!!!! HAHA! WOW, it's my bedtime... What does your charging system look like again? Not sure what you mean. I'll be running a universal alternator, and it will charge the rear batteries, then the saz-1500ds will be ran off the rear batteries.

How man would I need you reckon? 200 amp hours. The Powermaster D3100 "only" has 117 AH. A Kinetik HC 2400 "only" has 128 AH. An Optima Yellow Top "only" has 120 AH, the higher the better. I'm not sure about the MAX amps the 122000 is though... Not how many amp hours I'd need How many batteries

How man would I need you reckon?

I'm wondering which batteries I can use and how many of them from these guys... http://www.batterydirect.com/batteries/sealed_lead_acid/20 I'd be running 2 Sundown 1500Ds strapped. I don't really understand the specs. The D121200 is in the same "class" as the Powermaster D3100... I would like to run battery direct because there distributor is closer to me and theres a dealer in town.

Whats out there thats relatively beginner friendly? I want to see if I can do a ported box for 3 MJM-18s or 2 IXL-12.2.2s..

Hopefully since my trucks a reg cab theres not much to rattle... I can't measure the bed right now cause all the body parts for it are in the back.

I'll measure the space when I get home. I seen a vid of 3 MJ-18s on a SAZ-1500D on youtube... looked pretty crazy... actually hang on now.. ..... about 1 minute later... Says it does a 146.4 If I could get close or surpass that with four in my truck I'd definitely be happy...

How thick is the trupan?

a box wouldnt be hard to design a box and 4 18's would be sick on a 2500d. do you have a 2500d already if so that helps money a lot? put the cap on and see how far from the bed floor to bottom of the window is and go from there if you want help let me know. No I don't have the 2500D but I can get a pretty decent deal on it... I can get a pretty good idea of how much space there will be from the floor to the window with the cap off. There should be tons of room there for the MJMs, the box can take up the whole space of the bed.. I don't care.

The Orion 2500D puts out 2500W @ 1 ohm.... so 4 SVC4 subs = 1ohm....

I was kinda thinkin 4 of those MJM-18s and that Orion 2500D... My box guy don't really like the MJMs... I'm so confused to be honest. If I knew how do design a box I'd do a box that would lay flat like those pics, 4 18s in a ported box, and just put a baffle over top the box like in that pic and seal it to the truck... done... but I was told by somebody on SMD that it might turn into a bandpass by accident or something and mess with tuning... argggggh.,....

Gearstix, I will be doing the back part of my roof in the Frontier this weekend when the new box goes in. I am still using my old headliner (unless I somehow destroy it pulling it out) but I will get pics to show how it all goes together for you. You will have the tightest rattle-free roof after you build yours. Pics up by Monday. Did you ever post up those pics mdex?

So which will it be?

Haha happy b-day... It seems I missed the boat though.

I could I guess haha..Waitin on a email from my box guy...

Wouldn't the Directed be easier on the electrical?

It still does over 1kW at 2, right? 1700@ 20hm according to AmpGuts

Doesn't put out as much power @ 2 ohm. two 12 inch IXL-12.2.2, dual 2 ohm = 2500W+ @0.5 ohm two 12 inch IXL-12.2.2, dual 2 ohm = 2400 @ 2 ohm

The subs I'm most likely getting are the Mach 5 IXL-12.2.2...two of them, and they are only Dual 2. With the Orion, I'd need to run it @ 0.5 ohm. With the Directed, I can run it @ 2 ohm. With the Directed, it has to come across the border. Which would you get? I can get both for the same price, but the Directed has to come across the border..