diablo_331

i finished the install of two dp21's powered by two saz1500d's....all gains were set with a DMM for 1600 watts each(amps were each seeing a .5ohm load) my electrical is very good with a 250amp alt and 2 group 31's in rear and all 0/1ga.. now to my problem...i started to notice a slight rattle coming from the port...so i stuck my head in it and it was coming from one of the subs....there is no way that something could have gotten into the cooling on the sub,so thats out...i think it might be a coil unwinding but ive never had this happen so i dont know what it sounds like...i didnt get a chance to take the sub out to look at it before i left.

i cannot download them however my girl friend is going to try to get them on her facebook..then ill post them

it rivals my last setup with (8) sundown SD-1 10's...any thats a SQ based sub...but its ALOT more output

just ordered a MLA module from missinglinkaudio.com and 50 ft of 0/1ga welding cable from weldingsupply.com...might order some resin for the inside of the encloser as well..any thoughts on the resin?Yay or Nay??

i could trade in my saz1500d's for the saz2000d'swhen they come out!!!this would be a great idea!!

here is a pic of the 149.8...im to sick of trying to get this pc to upload vids....so i took a still shot

X2^^^ go with the sundown/FI combo...ull be much happier

i wish..id like to see a SSA sale with powermaster

so me having a metet=more responsible daily bumpers

im looking a good online site to buy some epoxy resin along with some 4 or 5 inch wide 18oz.(or so) cloth tape...anyone know of any good sites?

the colder temperatures may have had an effect on the batteries...stiffer spiders also..

the effect of colder temperatures may have had an effect on the batteries...stiffer spiders also..

lol we were knocking tools off the walls at a local shop...u should be very happy with the DP's..i metered a 149.8 with less than perfect conditions

lol..$5..i could charge like $10 to $15...we could use it for testing and i could eventually make back the money

btw drew...im looking at a term lab right now...its very tempting

i couldnt get an internet connection yesterday after i got the pics up....but i did a 149.8 legal at dash with warm amps and batts that needed charging..i was hoping for 150+...after my port plug and 2 more saz1500d's come then im hoping for a 153ish...

ouch....the product is decent...that sub is nothing more than off the shelf parts but still an ok sub...the customer service is HORRIBLE....ive said enough..my blood pressure is rising a little to high

im still pissed off...not gonna build another box anytime soon b/c i have no time to do it...but i will have 2 more saz1500's very soon..and maybe some IA Warden series 21's to drop it with 7k for burps...also iv been drawing up a port plug..playing with several different ideas ATM..

ive already had it metered.......vids in a bit...

videos in a bit....

before and after pics of the wiring mess.... before... After...

picked up about $300 worth of random stuff from parts express and knu koncepts awhile back..this is some of it..

look at the ass.. twins.. hammering t-nuts in.. moving the amps down so i can put my drivers seat back a little more...its perfect now added the hc2400 to the d3100...rivals that work very well together