Jacob86

Thank you that answers a lot of questions

Amps Sundown: sae-1200d Sundown: sax-50.4 For the 1200 Gain- (will be set with DMM) Sub Sonic- I was thing about 27hz Bass Eq-0 X-over-??? For the 50.4 Channels 1&2 Gain-DMM Sub Sonic-??? HPF-??? Bass Boost-Lowest Settings Range-??? x1 or or x10 Channels 3&4 Gain-DMM Sub Sonic-??? HPF-100hz Bass Boost-Lowest Settings Sub Fi Q 15 w/BP 4^3 Box 30hz Speakers: Channels 1&2 Infinity Perfects 6.1 Frequency Response (

dual 2 wired at 1ohm

thanks for hanging in there with me

Thank you

How do I wire to the 4 terminals on each speaker.

So do I just need to y the positive and negative from the amp so I can hook up to the 2 +s and 2 -s? I was thinking that would give me a wired ohm load

sorry its a coax, and its from pe here's a link http://www.parts-express.com/pe/showdetl.c...tnumber=299-275

I will be running them of the 3 & 4th channel of my sundown 50.4. I havent a clue right now how to hook them up Thanks for any help Specifications: *Power handling: 70 watts RMS/110 watts max *VCdia: 1" *Le: 0.53 mH *Impedance: 4 ohms *Re: 2.9 ohms *Frequency response: 48-20,000 Hz *Fs: 48 Hz *SPL: 86 dB 1W/1m *Vas: 0.64 cu. ft. *Qms: 2.63 *Qes: 0.85 *Qts: 0.64 *Xmax: 2.5 mm *Tweeter crossover: 10 kHz @ 6 dB/octave *Dimensions: A: 6-1/2", B: 5-3/4", C: 3-

Has anyone ever used these Vifa A16CG-21-04 6-1/2" Coaxial w/Audax Tweeter 4 Ohm? Im thinking about using them in the rear door of my blazer. I will be using them with my sundown 50.4 http://www.parts-express.com/pe/pshowdetl....275&scqty=2 Thanks

http://reaudio.com/speaker_box/LPort_Box_Calc.html

Try using thing http://reaudio.com/speaker_box/LPort_Box_Calc.html Plug in your dims and then monkey around with the port till you get around 30hz

15BL-2.8-4 cubic feet ported 15BTL-3-5 cubic feet ported

This is way too much $30 for 1/0 wire http://www.knukonceptz.com/productDetail.cfm?prodID=KOL1/0S Google or ebay for the ring terminals wont be much

ill just keep my infinity perfects then, thanks

sorry that was not what i ment. I dont care what they look like since i proby be the only one that will ever see them.

They only good looking one i could find were the Focal 165A3. Are these any good? or can you suggest any thing else. I can get the focal for about $250 so nothing over $300 thanks

This is what my friend and I listen to (didnt think i'd find someone else like us) but anyway he has the same sub and its in a 30hz bandpass box and it sounds great. It can really keep up with the double bass. The deep bass sounds good but its not overwhelmingly loud. This is in a trunk. I have a 15q w/bp and I had mine in a sealed box and felt it handled everything well, but i felt it had more to give, so Im building a ported box at 30hz. Mine is going in a blazer. hope this helped a little

alright, so im going to go with a double baffle and 2 45's and in the rear on the box, should i put them in the front 2 coners? and should I add any other bracing?

I've never used 45's how do i know how large to make them, and how would i find out how much volume I was losing?

I have the basics for this box already, but I need to know if I need any bracing (if so, what kind) or any other tweaking. Also the sub is facing up, does it matter where I place the sub? (closest to the port opening or furthest away) Box is 24x30x15.5 Port Width is 3.9" Volume a little under 4^3 (after displacement) Tuned a bit above 30hz Thanks

x2

thank god i was to lazy to throw the box away, i found everything right where it

im glad im not the only one...ill have to dig through my trash Thanks for the quick response

Is it supposed to come with it or do you have to use your own? Just asking b/c i just got mine and there wasnt one.