Everything posted by streetbeater07
-
AA Havoc VS DC lvl 4 or lvl 4 xl
I want ground pounding lows and still have musicality. I want a good all around daily system that will turn heads.
-
AA Havoc VS DC lvl 4 or lvl 4 xl
im running dual 2 ohm and they will be wired to series parallel
-
AA Havoc VS DC lvl 4 or lvl 4 xl
bump..
-
AA Havoc VS DC lvl 4 or lvl 4 xl
I will be ordering three 12's soon and need some help as to which one fits my application the best. I have a 6 cube box tuned to 32hz that i will be using. I want loud daily subs with the ability to get low. These will be ran off of an Saz 3000d @ 1 ohm. This will be a daily system and may do a little streetbassing here and there..
-
Need new sub suggestions please
The box tuning is fine. I like the way it sounds, just need woofers designed for a daily beater that will take 1000+ rms. I was IA Lethal Injections.
-
Need new sub suggestions please
box is 6 cuft. internal after all displacements tuned to 32hz. I want a loud daily beater that gets low. Running 3 deep cell batts in the trunk and soon to be mechman or dc power alt. I havent decided on the alt yet, i've been checking around and getting mixed reviews on which is better.
-
Need new sub suggestions please
anybody?
-
Need new sub suggestions please
Which one would have the most output for daily in a 3 12, common chamber slot port tuned to 32 hz? Im mainly looking for something that will get loud and low and still sound moderately decent. My amplifier is a saz-3000d so im looking for 3 12's in the 1000 + watts range. Anyone have experience with the two? Any help will be greatly appreciated.
-
Ascendant Audio Dealer In Alabama
does anyone know who the rep for Alabama is? Can someone point me in the right direction so i can inquire about 3 Havoc 12's D2 ohm. thanks
-
Post your IA installs here
- Has anyone ever clamped a US Amps MD3-D?
Will the md3d do rated power or a little more? who's clamped one to see what it actually puts out?- fi ssd or aa chaos
which of these is better:- help with deciding on dual 1's or dual 2's
ok thanks for clearing that up. one more question for you, if i go with the ssd's do i need to get the bp power options and flatwind coils? what do these actually mean? It will only be a daily driver setup with 2500 watts. I wanted to get the bp power option because of the extra cooling it adds but dont really know if i should get the flatwind coil?? I hate to spend the extra money on options if i really dont need them> thanks guys for your help- help with deciding on dual 1's or dual 2's
Thanks guys i really appreciate your help..thats exactly what i wanted to know. You saved me some time and money...- help with deciding on dual 1's or dual 2's
Im getting ready to order three fi ssd with bp option, but i want to make sure i get the right ones for my application. I will be running 3 of the 12 inch ssd's off of 2500 watts at 1 ohm. my question is, do i need dual 1 ohm or dual 2 ohm subs? What is the actual coil impedance? Are they dead on 1 or 2 ohm, or are the impedances actually lower or higher?? I want to do 3 dual 1's ran in series and then paralleled all together at .67 ohm, but if the actual driver impedance is lower than 1 ohm per coil, the total impedance may be a lot lower and i don't want to risk burning up my amp. Now, on the other hand, if i go with dual 2's and wire them in series then paralleled all together, i would be looking at around 1.3 ohms. I want to get as close to 1 ohm as possible so if i go with d2's and they are actually higher than 2 ohms each coil, my final impedance will come out closer to 2 ohms.. So basically what i need to know is do the coil configurations normally run higher or lower impedances from the factory? i prefer someone from FI answer this question. i emailed nick yesterday but haven"t gotten any response yet...- Hello SUNDOWNZ need a little help
pm'ed back- Hello SUNDOWNZ need a little help
they can handle it, maybe not for sustained periods of time, or maybe not in stock form.- Hello SUNDOWNZ need a little help
I want longer coils, 5 spiders and cooling options on the new recones. thankx- Hello SUNDOWNZ need a little help
im ready to ship. I emailed you also.- Hello SUNDOWNZ need a little help
I play them based on said ability. I buy subs according to the amount of power they take but maybe the 40.1 is too much.- Hello SUNDOWNZ need a little help
haha, no, lol...- Hello SUNDOWNZ need a little help
hello Jacob, I my nightshades blew on me. I was pushing them with an IA 40.1 @ 1 ohm no bass boost and gain set properly, however, I don't want to change my amp so I want to upgrade these to handle the power. I need to know how much it will be to have these two reconed with more spiders and longer coils. They are dual 1 ohm 15's. Please let me know because I want to get this done asap have the money on hand and getting ready for a local comp. Thanks.- ok...what should i do with 3.5 cubes net
1 15" q, port back sub back.- Tips/Advice/Help?
get some weight gainer, creatine, multi-vitamin and go heavy!- options for nightshade 15's
now only if had a 3000d... get one.. definately worth it got a 40.1, now I want a matching setup.. - Has anyone ever clamped a US Amps MD3-D?