lamchop_8

Yeah three alternators is a little too much. I was thinking about either 2 300 amp alternators or 2 200 amp alternators. but i cant find any for my car

I know,I guess I just got a little over reacted but overall do yo think I have a good setup??

Yeah your right i might just settle for 2 of them or 2 200amp alternators. BTW i cant find any ho alternators for my car i looked on ebay and everything for h.o. iraggi alternators for my car and their only for the 90-99 models and mine is a 02' i have the gt pontiac grand am please help me!!!

Its very hard to hit 180db. you would strictly have to have spl subs not daily drivers and lots of power watts subs etc. the more db you have the harder and harder it is to gain more. i just hope i at least hit 157db. just like people say its gets harder. but depending on setup 158db is possible.why woud you want 180db not to mention that 180db Can Kill!!!! BTW:How much db is meade hitting with the 4 btls in the 01' tahoe??? anyone know??

So since you said lay off the "Dynamat" that will really tear my car apart and break my windows would'nt it??

I seen this guy on youtube with 2 18'' Fi.SSD's on 2400-2800rms in this box below hitting 149db. (In a Ford Escort) www.youtube.com/watch?v=IZhfN9Gxcz8 If he hits that much with entry level subs how much db you think I could hit with this system?? WITH THAT SAME BOX ON HIS VID. This is my !!!Soon 2 Come!!! Setup how good is it??? Vehicle:(1) 2002 Pontiac Grand Am Gt (2-Door with Sunroof) SUB:(2) 18'' Fi.BTL (Fully Loaded) D2,cooling,hixm coil,induct heat ring,DAILY AMP:(2) Sundown SAZ-3000D (& BTL's are recommended @ 2000 Rms) The btl is getting the whole [3000 rms+] Making a total of 6600 rms Enclosure:(1):[Ported] 12.6 Cuft. (After Displacemant & Port) Tuned to 34hz. 3/4 MDF (8):Screws for terminals (Better solid connection no leaks) (8):Dynamat xtreme speaker kits (2):Dynamat xtreme license plate kit (3):Packs of dynamat xtreme (complete car kits) (1): Dynamat trunk kits (1):PAC 200amp Battery Isolator (3):300amp Iraggi HO Alternators (3):Kinetik HC 2400 Batts. (1):Kinetik HC 800 (under the hood or yellow top) Big 3 will be done (beefing up my electrical system) Etc. Amp Kits:(2) Kicker PKD1 Speakers and components will be by Sundowm Will that be loud? Also how deep would it get for two subs with a enclosure that big? Does Dynamat make your bass deeper? For a lucky quess do you think I'll hit @ leats 156-158db's+ if not a little over since I have dynamat and because the dynamat website says itself it gives you at leats a 3db increase alone maybe more db's are vechicle variant? But 3db's garanteed!! And because he has entry level subs hitting almost 150db and i have top of the line subs. Also is'nt there a 3db increase because the subs are going to be in the back seat right behind me and not in the trunk? and since the port is going to be in the trunk can i still do hair tricks or not? Now I know dynamat gives more bass,better SQ,stops rattling,3db increase if not more,But with three dynamat extreme (Complete Car Kits) can you still hear the bass from outside the car and can people still hear me before they see me or what?And can I still get hairtricks with dynamat or not? Should i get the enclosure double or triple baffled With the enclosure being tuned to 34hz. I know it will hit hi notes good but will it still hit low low notes good? Is that one of the loudest "2 sub" sub setups you seen? P.S:Try to answer all of the dynamat and enclosure questions if you can!! Sorry for all the quesions please dont cuss me out

Im getting 1 18'' fi.btl fully loaded and my enclosure is going to be 6.3 cuft. (After all displacements) 3/4mdf tuned to 34hz. But as far as the port can you please tell me how long,tall,wide,etc. it should be for best hairtricks,loud bass at high notes,and the best low bass I can get (Since being tuned to 34hz.) without port noise. One more thing as far as the enclosure should I have the top and bottom of the enclosure double baffled or triple baffled or the whole enclosure double or triple baffled or what? Please help as much as you can I really appreciate it!!! Thanks guys

I need to know what amp is better for my 18'' fi.btl between these two !!!NEW!!! AudioQue (AQ3500D):700 Shipped http://www.audioque.com/aq/AQ3500D.htm http://www.audioque.com/aq/images/AQ3500D/AQ3500Dguts.jpg OR (1) Sundown (SAZ300D):[REFURBISHED] BY:DB-R (720 Shipped) (Comes With) .Original Box .Bass Remote .Copy Of Owners .Warranty Card .1-Year Warranty (From Db-r Electronics) http://www.db-r.com/sell/store/images2/ra/...-3000D-04lg.jpg Which amp should I choose???

I'm buying a 18'' Fi.BTL,Daily,d2,cooling,hixm coil,induct heat ring and I want to know which amp is better between these to? (1) !!!NEW!!! AudioQue (AQ3500D):700 Shipped http://www.audioque.com/aq/AQ3500D.htm http://www.audioque.com/aq/images/AQ3500D/AQ3500Dguts.jpg OR (1) Sundown (SAZ300D):[REFURBISHED] BY:DB-R (720 Shipped) (Comes With) .Original Box .Bass Remote .Copy Of Owners .Warranty Card .1-Year Warranty (From Db-r Electronics) Specs http://www.sundownaudio.com/3000d.html http://www.db-r.com/sell/store/images2/ra/...-3000D-04lg.jpg Which amp should I choose??? BTW:Everyone tells me to pick the Sundown amp instead of the Audioque but the Audioque puts out 3500 rms and the Sundown puts out 3000 rms will the Sundown put out more than 3000 rms or what?Also both amps say 300 external amp fuse are'nt included so how am I supposed to use the amp?Also were do I buy the 300 amp fuses from. I'm open for any answers I apperciate any help.

As you know this is my setup (I just posted it for people who didnt know) SUB:(1) 18'' Fi.BTL (Fully Loaded) D2,cooling,hixm coil,induct heat ring,daily AMP:(1) AudioQue 3500D (3500 Rms @ 1 Ohm!! & BTL's are recommended @ 2000 Rms) [is the amp good or what?] its getting the whole 3500 rms http://www.audioque.com/aq/AQ3500D.htm http://www.audioque.com/aq/images/AQ3500D/AQ3500Dguts.jpg (4):Screws for terminals (Better solid connection no leaks) Enclosure:(1):[Ported] 6 Cuft. (After displacemant) Tuned to 32hz. (MAYBE) 3/4 MDF (1):PAC 200amp Battery Isolator (3):300amp Iraggi HO Alternators 2 Kinetik HC 2400 Batts. Big 3 done (beefing up my electrical system) etc. Also everyone said make the enlcosure to about 6 cuft. since im giving it 3500 rms so it wont unload but can I make it 6.5 or 7 cuft. after displacement and port? what would you choose? Also how much of a db gain will I get with 3 or 4 packs of dynamat extreme complete car kits? Now I know dynamat stops the stuff on your car from shaking and gives better sq more bass but will you still hear me before you see me wit it? Because if not I dont want it! hopefully with dynamat installed I'll be in the early 150's if the sub hits 146-148db alone. What do you think? P.S:Is "Cooling" option for btl mainly for daily or spl? if for spl option i'll stick with the P-chamfer. please answer all questions

If it was you would you recommend removalbe ports so you can find out what you like best or what? Because mainly somedays I'll want to listen to low notes 27hz. port,Then if I want regular music 32-33hz or hi notes 35hz.

Yes I love lows that shake my car but I would still want to be in the late late 140's to early 150's. I've seen people with one sub that hits 150db (Not SPL Daily) so its not impossible it just depends on the setup. I just wish I could have both you know? so should I get removable ports or what?

I'm upgrading from fully a loaded bl to fully loaded btl (d2) This is my (Soon To Come) setup is it good or not? SUB:(1) 18'' Fi.BTL (Fully Loaded) AMP:(1) AudioQue 3500D (3500 Rms @ 1 Ohm!! & BTL's are recommended @ 2000 Rms) [is the amp good or what?] its getting the whole 3500 rms http://www.audioque.com/aq/AQ3500D.htm http://www.audioque.com/aq/images/AQ3500D/AQ3500Dguts.jpg (4) Screws for terminals (Better solid connection no leaks) Enclosure:(1) [Ported] 6 Cuft. (After displacemant) Tuned to 32hz. maybe 3/4 MDF Thats my setup but my main question is how much of a db differnce is a enclosure thats tuned to 32hz. from a enclosure thats tuned to 34hz. I love loud music but I want it to get deep as well (I'm not spl just daily) so whats best? For A lucky quess do you think I'll hit @ leats 149db's if tuned to 34hz. Do you think I should get removable ports like 27hz,32 hz,33hz,35hz, or dont do that just keep a regular port? P.S:This is my budget so please dont ask for anything more expensive

I decided to back out on the whole 10 cuft. enclosure thing. I finally just realized thats tooooo big so I decided to go down a little. Now I was thinking about it being 8.5 cuft. tuned to 32.hz is that good for low and high notes or what? P.S. Sub,options,amp:18'' Fi.BL:dual 2ohm,Cooling,Flatwind coil,and daily option.its going to be hooked up to a US Amps MD1D thats 1200 rms @ 1ohm (CEA-2006 Compliant) BTW:If you need any more info just hit me up!! thank you:)

If money isnt a option I would get the one with 1600 rms. Do you have any applications with the q. FI.Q's can take 1600 rms clean as long as everything is set up right. also make sure your gain is set right to so it doesnt start clipping.Hifonics is a very very good brand in my book. Just because their not CEA-2006 Compliant doesnt mean they get the job done. Alot of people I know use Hifionics for FI.Subs. But me im using a US Amps MD1D which is way better than hifonics & its also CEA-2006 Compliant. but yea if money isnt a option get the 1600 rms one but if your on a budget or low on funds like me get the 1200 rms one either way it will still hmp fine! BTW:what kinda enclosure is it going to be in? how much cuft. and what is it going to be tuned 2?

Its going to be wired to a US Amps MD1D. Its 1200 Wrms @ 1ohm! (Real Watts!)

The Fi.BL is being shipped now and i want to know how big 10 cubic ft. is.because the specs says 5-10 cubic ft. so i was going to get the enclosure built to 10 cubic ft. Is 10 cubic ft. good for that sub for max bass and Hitting Good Low low notes or should i stick to the 7-8 cubic ft. range?? P.S.:Space is not a option so you dont have to ask that?These are the options:dual 2ohm,cooling,flatwind coil,daily. How much inches wide & tall should the port be for this monster???? Thanks Guys:)

Okay thanks for that! I didnt know you can do that I'll make sure to do that!!!

Okay thanks for the info this is how the amp looks http://www.soundsolutionsaudio.com/zencart...ges/md1d-1s.jpg When I get everything shipped + installed I'll send you a video if you want. Good luck with your system?

Nice new setup! how much were the subs and what site did you get them from? how much db you hittin?

I plan on buying 1 18'' Fi.BL with these options:dual 2 ohm,cooling,flatwind coil,daily option.Hooked up to a US Amps MD1D thats 1200 rms at 1 ohm.the BL's handle 1000 rms do you think the bl can handle the whole 1200 rms from the amp?I love loud bass but want it to hit low notes as well so what should i tune it to? With a ported box from 6-9 cubic ft. BTW just for a lucky guess how much db will I possibly b hitting will it be over 145db possibly 148db-149db.is that loud? Please answer all my questions. P.S. I found the US Amps MD1D for just 209.00 is that a good price or is it the base price? 210.00 is my max im on a budget.Also how good are US Amps from a 1/10? Are they better than Kicker and Hifonics?Also whats the best kind of mdf wood for subs? to my knowledge 3/4mdf is? but I heared people on youtube talk about 21mm and 18mm mdf are those better? If so which one? and is the q louder than the bl because with the bp power for the q it can handle 200-500 more rms than the bl. Thanks Guys:) The Fi.BL is being shipped now and i want to know how big 10 cubic ft. is.because the specs says 5-10 cubic ft. so i was going to get the enclosure built to 10 cubic ft. Is 10 cubic ft. good for that sub for max bass and Hitting Good Low low notes or should i stick to the 7-8 cubic ft. range?? P.S.:Space is not a option so you dont have to ask that?These are the options:dual 2ohm,cooling,flatwind coil,daily. How much inches wide & tall should the port be for this monster???? Thanks Guys:)

Are you 100% sure with that answer or are you just pulling my leg?Because my 2 12'' Kenwood Tornados are hitting 137-141db the only reason why their hitting that much is because of the enclosure. You can have a chitty sub + amp but put it the right enclosure and it will thump. Am i right?if not correct me. BTW:Their for sale if anyone wants them 300 cash

Yeah 210.00 is my max.Im saving up on it. so how much db could I possibly be hitting?

First off how much are you willing to spend on a amp? My friend is selling it for 209.00 and its 100% new! He's selling it because he never got it hooked up + he needs the money So is that a good price or what?

I plan on buying 1 18'' Fi.BL with these options:dual 2 ohm,cooling,flatwind coil,daily option.Hooked up to a US Amps MD1D thats 1200 rms at 1 ohm.the BL's handle 1000 rms do you think the bl can handle the whole 1200 rms from the amp?I love loud bass but want it to hit low notes as well so what should i tune it to? With a ported box from 6-9 cubic ft. BTW just for a lucky guess how much db will I possibly b hitting will it be over 145db possibly 148db-149db.is that loud? Please answer all my questions. P.S. I found the US Amps MD1D for just 209.00 is that a good price or is it the base price? Also how good are US Amps from a 1/10? Are they better than Kicker and Hifonics? Thanks Guys