dwright27

i wish i had 1/4 of your skillz dude. :drool:

nice box.

ive got a 29 hz hairtrick vid with the MT 18 on 1500 RMS

elaborate please.

idk guys ... black paint with a few coats of clear is gonna go nice with it

thinking of painting the port tomorrow. not sure atm though lmk what you guys think.

started my other a-pillar got more bondo and sanding to do before they go back in. not much longer before they get painted though.

Started this box Saturday evening for a customer. He has an 03 or 06 or something Expedition with the 3rd Row and was wanting something custom back there. first thought was to do a fiberglass amp rack in between teh woofers. After an initial test fit it was outta the question. Circles arent perfect as my jasper jig wont be here until tomorrow and i still have a few more things to do before he pics it up tomorrow. Round over a few more things and sand all my wood filler down, as well as put the carpet on it. sory i didnt get many pics, was trying to get it done ... onto the pics. every screw was countersunk and most were hand tightened. its sub back port up because of space. 10" max at the top where the seats go back. 3 - 3.5 cubes after displacements with double baffle. tuned @ 35 hz with 36 square inches of port. was gonna do 60 sqaure inches but the length of the port was too long. its a wedge and we are doing trim panels eventually when he gets the extra money.

nice old school amps back there

really started on the a-pillars yesterday. got one of them done and back in, fitted with a 4" Kicker. Streched muh fleece and did a little glassing. Theyre strong as it sits and i got a few low spots on thre that i needa fill and sand and chit but FOR NOW im happy until they end up with more work put into em. Plan on covering them in a vinyl or suede. not sure yet or when it will be done though. onto the pikchaz

i meant low - mid 140s around 40 hz and higher with a good install and a nice bit of amp power/cone area.

most set-ups you will hear on the street are low - mid 140's. 1540 is UBER loud for a daily driver.

link to school website? that looks FUN AS fudge!!!!!

my guess is clipping to a point.

times 2 best for ext. cab trucks imo

that chevy is sick where is your shop located at?? and is that an integra?

Pantheron info taken from AJ.com Here are the Thiele/Small parameters of the Parthenon that was used at CES 2004. Fs: 11 Hz Qms: 19.4 Qes: 0.73 Qts: 0.70 Vas: 4560L Sd: 3716 cm^2 (24" square) Xmax: 72mm one way BL linear Xmech: 140mm rearward one way SPL: 91 dB @ 1W, 1m Impedance: quad 4 Ohm voice coil Cms: 0.24 mm/N BL: 30.5 N/A Re: 11.2 Ohms (all voice coils in series) Mms: 880 grams Vd: 53 liters Pmax: 2000W total

glassin a tweeter in the a-pillar ftl. shoulda done something bigger

you shoulda went with Q's. they are made to play loud down low. BL's are nice woofers though, but IMO they are more of a 40 hzish type woofer

looks sick.

ahhh w00t for duran

either is fine with me

pics or its all lies

you are drews girlfriend?

her parents are non existant ..... moms a crackhead whore, and dad is a dead beat who lives with HIS mom. hmm Okay then... well dose she have anyone that she is close too? that is like a parental figure? not really anyone besides her aunt, and her friends. her friends hate me and im not resorting to her aunt.