Everything posted by nem
-
Welcome to the IHoP
Leaving for St.Louis Thursday for the Haunt convention and visiting an awesome Haunted House called The Darkness. Does anybody know of what there is to see in the St.Louis area?
-
300C Bagged on 24s, tear down and build log! Vid, P.6
Awesome video!
-
Single 12 xcon + BJ fisher box
That box looks very interesting. Are there any advantages in that type of port?
-
No warranty on the BTLs ???
Very well said!!
-
Best amp for 12" Fi Q?
You should really define what you mean by best so that you can get the information you need. Just my .02 baised on the dollar amount, if you can add a little more you can get a Kicker zx1000.1, or check the sundown section for used or B stock.
-
Blown Fuses, quick question..
I was wonding if it made any type of noise or even reproduced music, sorry for not being clear. Sometimes the relays may hang up because of arking. That migh have been part of your problem to. Just keep an eye one it.
-
Blown Fuses, quick question..
It powers up right. Does it put out any sound?
-
Welcome to the IHoP
What size tank do you have? small one, like 6 gallons. The otocinclus only grows to maybe 1.5", and other than that I just have two red tetras that I've had in there for like 8 months. They're also only about 1.5". I just have a small algae problem (have to scrape the glass about every month) because the only place in my townhouse for my tank is in my room and it gets quite a bit of light. Plus I don't have any live plants in there, though a few of those like mini lili pads were in the bag with the oto, so if they multiply then that'll help cut down the nitrogen. But I got the oto because I was bored with the same two fish and thought maybe he'd help my algae. I have some small snails in there, too, but they don't really do anything to it. That is how I started out and worked up to a 300gal reef tank. Couple of years ago I down sized to a 150gal. This was a bad habbit for me for many years. I still have a brand new 400gal sitting empty.
-
Hello SSA, another Louisiana member.
Welcome. Nice doors!!
-
Blown Fuses, quick question..
Baised on your pictures, the only thing I see might be the by the 2 black caps. Do you have a way to power up the amp?
-
Blown Fuses, quick question..
So if you ever jump your car you should remove the big power fuse in the hood? Might be a good practice to save your equipment.
-
help on my active set up
Seriously, that is some awesome help ///M5.
-
Blown Fuses, quick question..
A picture will tell us what may have happened. Yes his fuse was blown, but the damaged happened before the fuse blew. Just for referance is was a Rockford Punch 45 before the HD series. A long time ago.
-
Welcome to the IHoP
What size tank do you have?
-
Blown Fuses, quick question..
I remember years ago my brother received a jump start from somebody and did not remove the fuse in the power wire, he ended up burning the diodes in the power supply.
-
SMD series delays.
Have you dealt with anybody from First Quality?
-
How to wire your Sundown amp.
Are you serious?
- Redemption
-
12ssd copper - sealed enclosure
ported purely for volume? I am going for the most control and tight I can get. Also my Zapco has a nice dampedning factor Yes, I do like to get a little loud every once in awhile. I would listen to Nick. He has always been honest with enclosure sizes.
- ..Woopse...hehe
-
12ssd copper - sealed enclosure
I would keep it at 1.1 after displacment. This is something that I tried with mine and liked it, but deceided to keep them ported.
-
300C Bagged on 24s, tear down and build log! Vid, P.6
That is one good looking build in progress.
-
Where should I buy my enclosure?
That would be a very good way to start.
-
Small Build
That is not a bad idea for tweeter pods. Good luck and post the pictures.
-
SMD series delays.
Pretty good company to deal with. I have used them for a couple of projects.