djjdnap

So basiclly u need to have a good electric system to handle this amp....

SX's wang and sound good... i mean they both are good subs

what? wtf is a burp amp?? sounds like when the MT 1st came out people wold say don't use for daily, but now it seems to work just fine? lol gtfoh burp amp heres wat the public had to say... more here http://www.caraudio.com/forum/showthread.p...8134&page=2

lol, are they sayin sunday or someday? Sounds like the music at church when u walk in, lol... The band just doin they on thing lol waitin for them to start sayin mike jones though, lol

looks like the house from iron man, lol, the outside anyway... man that truck is nice without the sub, lol

lol autozone has that one u just connect to the batter + and - and it loud as shit... it goes off real easy so i would disconect it when u get home other wise the neighbors wont like u

try ur local auto parts store, they actually have tail light asses, lol, they might have tot clear one just call them and see

hmmm, i need a sub comparison, that might just be a small guy, lol j/k

its a 75, lol, i bet he's thinkin new school 1st pics kinda big huh, lol it will be loud just prolly not to u, since the sound is going str8 out into the air

after lookin we do charge them on 10A slow charge...and works very well Now at my house i have a 250A sears charger...6v start, slow, medium, and high start.....now i have no idea where the manual is, but somehow i usually charge it on medium and haven't had any problems. Also some FYI

sounds like 2 a days, lol well i have actually lost about 10lb's just from drinkin water

i think i need to go to my old high school and go back to the wrestling room and work out wt the heat on hell... I swear u lose about 8lb's easy, but its all water so it comes right back after u eat...

i was bout to post the same things, got the pics of my re-tensiling on my phone just never posted them. Get the cap off with a box cutter. Between the box cutter and soldering iron dig down to the tinsel, it usually has some black adhesive covering them. I worked it till i made a hole in the cone so i could pull it back through like below. You then use the soldring iron to disconect the old tinsel and it will be a small copper wire attached. Solder your new tinsel to it and pull it back throught the hole and put some glue over it i think i used goop. solder it back to the connector and glue the cap back on and wait for the glue to dry then your done. Sorry for the crappy pics, this was old and jusst figured id put what i had up

kinda expensive for my taste... but that should be everything u would need.

i take it that a 8 or 10 in is outa the kwestion

not seeing the significance of the rotor change, but def. calipers and brakes... u can drill ur own holes in the rotors, lol

yea i was thinkin that i might put a magnaflow on there cuz they are pretty cheap at my job, and yea i was thinkin the pack would be louder but not really, so it will probably sound about the same

12-16 square inches of area applies per cubic foot of volume. so 7*12=84 and 7*16=112 so between 84 and 112....i would guess this coming from the manufacturers and yea tuning would be higher its gonna depend on ur cabin tuning freq, so u gotta test to see what tuning would work best for u

well from readin i think most people go wt 7cubes tuned to about 35hz

http://www.caraudio.com/forum/showthread.p...hlight=mt+build http://www.stevemeadedesigns.com/board/ind...p?showtopic=144

i mean very

man whtats messed up wt my 93 ltc is that i changed everything and now am getting worse gas mileage, lol k&n filter, platinum +2 bocsh plugs, took off the muffler so it could breath and put a glass pack on there...pcv valve, sythetic oil & filter, and ummm fuel filter.. went fromabout 13mpg to 8, lol wtf runs alot smoother and all but gas mileage my ass 8mpg lol

check rca's

http://audioforum.termpro.com/cgi-bin/ubb/...pic/3/6803.html http://audioforum.termpro.com/cgi-bin/ubb/...pic/3/6543.html browse them two, i believe they are complete builds which are still ongoing

dial up ftw at my job, lol