Everything posted by jizazz12
-
fosgate t2000
thats what i thought if i get two d-2's that would put me at 0.5, so i need d-1's to get 1.0 ohm.
-
fosgate t2000
maby i wasn't clear on what i was running two sub's on one t-2000.
-
fosgate t2000
o.k. so if i go with a t-2000 I need to order the d-1's if running two correct?
-
fosgate t2000
getting ready to place an order for my Fi Q series 15's but not sure what amp to use. I havw a Jl1000/1 i'm useing currantley. I know that this this is not going to be enough to power the two subs,but will a fosgate t-2000 be enough or should i look for something bigger? Need to figure out what amp to go with befor i can order my speakers.
-
is a high o alt a must
NICE PICK'S....
-
is a high o alt a must
this is going to be a daily street beater not going for numbers or anything like that, just want to have a good low end.
-
is a high o alt a must
iv'e been doing some reading and am thinking of buying a saz-3000d to run my Fi q series 15's in my system upgrade. my question is a ho alt a must or will i be able to get by on factory for a while ? i have been looking around for an ho alt for my car but it seems like it's going to be hard to find one. I have a 2005 sonata four banger not your everyday base mobile.
-
need some advice on encloser`
7.49cu.ft. is after displacement, would I be able to use a set of bl's as well as q's in this box or should I stick with the q's . thanks for the help.
-
need some advice on encloser`
can somsody take a look at this and tell me what they think ,anybody please.
-
need some advice on encloser`
can someone give my box measurements a once over and tell me if this is going to work,I have 7.49 cu.ft. and i am going to make a box for two fifteen's . I am going to use either the Q's or bl's , the box is going to be ported useing psp flare ports 4"x 17" four of them at this length. is this going to be enough room and are the amount of ports correct to tune this box to 28hz.. this is for a daily driver I listen mostly to rap and R&b. If this doesn't sound right could some one give me some direction, this is my first box build and i want to get it right. any help would be graetly appreciated thanks.
-
enclosure help for Fi
thinking about putting two fifteen inch Bl's or Q's in , but I'm limited for space . I'm working with 17hx40wx28d going to be using 4" flare ports, question is should i keep the box right around 8 cubes or drop the size down a little to around 6 cubes and what should i tune it to 30 or 37 hertz? the car is a 2005 sonata box will be subs back ports back any help or suggestions would be appreciated.