Kanaworm$
Moderators
-
Joined
-
Last visited
Everything posted by Kanaworm$
-
-
To hell with whoever sits in the back! ... J/K. Only thing rear speakers are used for in most systems is fill if even at all. But like ///M5 said a proper front stage will more than make up for rear fill. You could just run your deck power to the rear speakers to see how it sounds. More than likely you will disconnect them later.
-
Icons ... http://www.soundsolutionsaudio.com/products/icon/10.html or Mach 5 IXL-10 Sound Splinter RL-i 10 Just to name a few. I have never worked with any of these, but I have read nothing but great things about all these drivers. On this forum and others.
-
Were not trying to rip on you. Were just trying to persuade you to spend wisely and get a quality driver for a bit more $$. Not saying that driver won't do the job...But it looks more like bling than quality. You may want to check out the new 187 Series from Incriminator. Quality with customer service! http://www.soundsolutionsaudio.com/forum/i...showtopic=22648 For box design ... http://www.soundsolutionsaudio.com/home/index.php/boxtools My advice would be to stick with a reputable company. You will be much happier in the long run.
-
Jacob, Payment has been sent! Cannot wait!
-
-
Will be placing my order here in the next day or so....
-
Sounds like you have either bad RCA's or one of the outputs on your deck is bad. Also double check to make sure your woofers aren't wired out of phase.
-
Nice job!
-
I think I know what santa can bring me for xmas...
-
That is one seriously big a$$!!!
-
Very nice looking drivers... :clap:
-
Use some Titebond II or any other good wood glue and coat the screw, should help. Nice score btw!
-
Welcome aboard!
-
OldSkool_08 = I was selling and installing back in the early 90's so therefore I am old and all the younger people call me old skool. Made the name up in 2008 so OldSkool _08.
-
Looks great!
-
Very nice!
-
1 BTL will need a minimum of 8 cubic ft internal volume with whatever tuning your looking to get. 128 cubic inches should give you roughly a 40 hz tuning if you wanted to go that high. To figure your port width take your internal volume and divide that by your internal height and that should get you in the ball park. Some recommend rounding to the nearest quarter inch. Try to stay within 10% of recommendation and you should be good to go! Please correct me if im wrong. Been awhile since I calculated boxes. Good luck
-
All 3 are great subs! I have heard nothing but good things about the Icons...So I would say get the Icons.
-
Welcome! Great people here. You will learn alot!
-
Welcome!
-
Nice build! I will be working on a friends 2001 Blazer with 1 Fi SSD 18".
-
Welcome!
-
My quick math says roughly 32Hz. I am sure somebody here has a better idea. Hope this helps.
-
This one has my vote as well. Great job on the design. Just my .02 how about if you have the fist coming through a shattered windshield.