Sencheezy

Here is my setup still going super duper dumn stupid hard after well over half a year. Cup trick, flex, woofer porn, big ass plastic bag trick. 148db in the kick.

Just to keep things going. Here is my zcon STILL going in on the BC5500 after well over 8 months.

Unboxing video

Hi guys, so here to show a short write up of my recently purchased HIDs from DDMTuning.com. First image is of what was all purchased. I will note that I first made order on Jan 1st, it was accepted on the 3rd, and received shipping number on the 4th. I basically did not see any update until it was here state side from China. I was told all 55watt ballasts are shipped from China. I also was never contacted back from their support team which was reached out twice via email and once via facebook. Items arrived on the 19th in NY, and arrived at my local post office the morning of 21st and arrived at my door on the 22. This image of the packageing. Here is whats in the box 55watt Ballast Error Eliminator H13 Hi/Low Ligh Bulb H10 Light Bulb Next are the before pictures Please, keep in mind, that I blacked out my headlights, as well as the fog lights. Ever since doing this, my visibility has droped dramatically. Basically relying on street lights. Outside driver side: If you notice, majority of my light output is coming from my fog lights, which you can tell by the amber light. About 12 ft from wall, outside passenger side: Driver seat: Those two pictures above are a bit deceiving, as I was surrounded by complete blackness, during city drive, the light output was no where near this. Next, are a few install pics I used two 5lb double sided tape per ballast: And there was LIGHT! Please note, thanks to Bassahaulic, that for my paticular application, I had to switch the neg/pos for the fogs. And finally, some after pictures About 5 ft in front: If you have your light darken as well, I would suggest going one less K level than you desired results, as you can see, they are reaching into the purple hue, which is not what I wanted, but this is caused by the black paint, is what I'm assuming. I would order the 6000k if I could do it over again. In this picture, you can see that I can finally see a pretty good amount several yards away now. Also, I have taken some highway damage on my headlights, which has resulted in paint chip in the passenger headlight, about the size of a dollar coin. I can clearly see that the black paint is holding back a really big amount of light output. I would definately go with a much lighter black next time. Passenger side of above image: Outside of passenger door: Again: In driver seat looking at same wall: Driver side looking at same wall: Here is about 10 parking spots down, directly in front: Same distance, but at a angle of oncoming traffic: And thats it for the pictures I've tooken. Conclusion: Pros: I absolutely love the product. The instrustions provided via website are very clear, and with pictures! The construction is really top notch as well. Very good connections, REALLY great detail to the safety and longjevity of the equipment as well with great insulation, heat protection, very solid connections, the whole nine yards. I really love the lack of advertisements as well. I can see where they really cut down on cost because of it. You willl not find a single DDM logo anywhere. I would buy again. Cons: The first thing that comes to mind is the definately the Customer Service. I have yet been contacted by. Now, I'm pretty sure they get flooded with shipping emails, but I was in no hurry, was simply looking for an update since my shiping order said it was being prep'd for shipping for over two weeks. Also the lack of details of items in store, I now have an extra harnes and error eliminator because it was not clear that they came in pairs. There was no package packing either. All equipment was simply in those little white boxes seen above, I could see where shipping damage could be a problem. That wraps up this review, thanks for viewing.

lloks clean

diggin the truck

very good start sir.

gl on the build.

lookin good old man.

damn good score

ew, maybe try the bestbuy forums with those.

I would say a box of 4.0 cuft would be best if you plan to use around 3.5-5.5kwatts. I'm at 4.5 with my zcon, and it would be happier in a smaller box. Any amp that you find here at the ssa store would do just fine. No need to compare one another, they are all well. Just pick based on your budget and goals.

Maybe it will help us all if you just list all/most of your products with a pricing and super duper eta.

nice gear. I hate haveing that much tint tho, with 15% up front I can barely see anything. I think its rather unsafe to be hone.

Welcome old schooler

That means you get a little taste first, let you get your feet wet, before you get your hands on full awsomeness. But from what you're saying, it'll be till the end of this year before this beast comes out, and its just January, THEN, that means the 120pound monster prob won't be out till 2017

Damn, so that means just more time to wait..

Community*

That's insane Haha. Well, the greater good of the communication really appreciative the r&d you have placed and of course the investment as well. The biggest question, ETA for the 12", and the larger sizes. ~6-8 months?

So I'm assuming by the title of the thread, the 12" will be the first to come out, then the larger sizes will follow?

Any idea on weight?

Damn nice!

=) My fancy has just been tickled.

I call you now.

Likewise. I would def go with the Xcon and the BC2K. You will save some coin doing so, and can put that toward a set of nice components. I too really like the idea of a xcon paired up with a bc2k. Though, I've never listened to a 13w7 in person.