Sencheezy

I currently run 1 15" Zcon and 1 BC5500. Best sub I've ever owned. I've had this for almost 8 months now. Box is 4.5 Cubes with about 70cuin of port. 147.6 in the kick 144.6 at the head 146.6 on the dash Once new box is installed, should find a 150 somewhere. I'm tuned at 34hz and peak at 46-48 door open.

http://store.sony.com/webapp/wcs/stores/servlet/CategoryDisplay?storeId=10151&langId=-1&catalogId=10551&Ntx=&N=4294946863&Nao=&No=&rpp=60&Ns=&Nf=&minPrice=&maxPrice=&navigation=NULL&categoryId=8198552921644632908 Go here for specs.

for the Sony XS-GTR100L, 10" 4-ohm subwoofer polymer cone features dimpled, five-sided design rubber surround grille not included power range: 75-330 watts RMS (1200 watts peak power) frequency response: 35-1000 Hz sensitivity: 84.5 dB mounting depth: 5-7/8" sealed box volume: 0.62 cubic feet ported box volume: 0.84 cu. ft.

Do you have the s/n for them? Or model #? There is a wide variety for sony xplode speakers man.

nice

I love the pics!

I have the 4300DVD, and I have yet attempted to use my android phone. I would suggest trying to use your usb cord though, that would be the first step. The next step, is to purchase the Blue-Tooth expansion and try that. If no avail there, then you could use the 3.5mm. I mean, there are many ways to go about this, have you tried any????

Yes, it did. Adjusting now. did you do that Aaron? Umm no? lol

I would first and foremost make sure you have enough space. In regards to finding a current subwoofer that is "close" to the 09 model, I wouldn't. I would try to find two more of the same year make. If you are unable to achieve this, then the next best thing will be to sell what you currently have, and purchase a set of 4 of something else.

I believe his and also my comments were a little insulting, his more than mine, but none the less, it was only our opinions on the product he decided to display...

Did "ChiLL"s post get deleted?

I love seeing your work.

Any more fisher?

Not to sound mean or anything, but the lettering on that got bass looks a bit janky? You said minor, but I see all kind of jagged edges every where. The top left corner of the "T" The "B" looks a little crooked and uneven, especially at the top left corner. The insides of the two "S"s look like they were carved by hand And then the "?", just looks all messed up. Again, I don't want to sound so judgemental, just saying from a consumers perspective. Maybe its the picture? Or maybe its not finished?

The big MMAG sub I have spoke of before will not be ready till the end of next year at the soonest. It features three top plates which in turn creates three magnetic gaps that provide around 75mm of one way xmax at 70% BL. Since no baskets or softparts will currently physically allow that much movement, let alone be linear, I've got to wait for parts to be made. I do however have a Big overhung motor sample coming with the Ethos production that features a 11" OD 2" thick magnet and 50mm thich top and bottom plates. The coil used with is a 100mm long 3 inch 8 layer aluminum coil. I guess the waiting shall continue another year To produce newer softer parts and baskets to allow such travel, isn't that going to be one big investment on you're part? to pay for R&D and such? I got a great group of guys for R&D that have a shop full of goodies to minimize wasted time and effort. But like all new developments there is monetary investments to be made. Tooling alone to build one complete driver is roughly 50 grand As long as you have actually step foot into the venture, than I cannot do anything but wait in joy!

Ayo Chuck, I got you man

The big MMAG sub I have spoke of before will not be ready till the end of next year at the soonest. It features three top plates which in turn creates three magnetic gaps that provide around 75mm of one way xmax at 70% BL. Since no baskets or softparts will currently physically allow that much movement, let alone be linear, I've got to wait for parts to be made. I do however have a Big overhung motor sample coming with the Ethos production that features a 11" OD 2" thick magnet and 50mm thich top and bottom plates. The coil used with is a 100mm long 3 inch 8 layer aluminum coil. I guess the waiting shall continue another year To produce newer softer parts and baskets to allow such travel, isn't that going to be one big investment on you're part? to pay for R&D and such?

that was fast

I would have chosen the BL.