Sencheezy

bcae1.com

Oh man. Like others have suggested, upgrading your electrical should be priority one. From what I can see, I think you may be hard on your equipment, knowing this, I would suggest running an alternator with temp sensing, such as DC power or like. I wouldn't go cheap on products, especially if you don't know what stress signs to look for. Get the biggest you can afford, but remember, the biggest isn't always the best. For example, some 370s and 400s out there will get REALLY hot, they will also barely do anything at idle, so just do a bit of research. Also, Lifetime warranty doesn't mean jack shit, so don't pay too heavily on that as well. Next, I would look into batteries For 6krms, I would highly recommend using at least 2-4 Large Group 31. They can be Deka intimidator XS Power, Kinetik, Sears Platinum Plus, or hell, even Duracell sells them at your local Sam's Club. Then, I would pick up some 2/0 Welding cable, either locally or on the web. After all of this, then you may proceed to the enclosure and subwoofer(s). From personal experience, I have ran a Crescendo Audio BC5500 on my SSA Zcon for over 8 months, and now I'm on the SSA Evil, going on a few months as well, NO problems. You just got to be smart about it man. Listen to what we're telling you. But most of all, do your OWN research, and USE SPELL CHECK.

I reconed both of my horns, not I"m back up and rocking! It's funny, how mostly everybody thought my stuff sounded so good before, I"m like, its only one working! haha.

Can't wait for you to get back in action.

Thoughts on the comps?

Depends on what music you listen to. Honestly, I just get 83% of my music from Datpiff.com

I've pm you back, on FB and here.

You've finished all your testing?

I pm'd you on facebook but still haven't heard from you sir.

bro hurry the efff up...also where did you post photos of the horns at??? can't find them My build log :/

Single xcon would be my vote sir. Just save another pay check or two, and do it the right way first. It will give you the ability to upgrade at a later date.

Just a lot of testing sir. I would first start with the box. Test almost every reasonable box size with different port combination. Like, 8cubes tuned at 47 with 90cuin of port, then test again with 7.5 cubes tuned at 47 with 100cuin of port. etc.

very cool

I will make a review on the Seas and Image Dynamics and the Evil and the ZED and the BC5500 sometime this weeknd.

thanks rick! Thanks!! Thanks!! Hellz yeah, a few more days. haha thanks AXE!! I'm glad you liked it man. I'm really diggin this setup right now. update this thread bro!! I know those horns are there!!! looking for a review? lol

really high miles turns me away. im sure you could find something as enjoyable with a lot less miles 97K is really high? yes its too close to 100k for comfort Hehe, Sean, I work here in Franklin TN

4 months!? Dafuq

They are all about the same man, they are all sister brands, just pick your brand and role with it bro.

Thanks Chuck! You should man, I've had great results so far. About 3-5 hours in total, just a lot of prep work man lol. Thanks Chop! Plastic Dip will NOT come off unless you intentionally take it off. By that I mean, cut a slit, AND begin pulling away aggressively. It will NOT come off with no type of brush or brissles unless you try to. Thanks! Yeah, haha, they look really dark in the picture. No, windshield is stock except the top strip. I would advise to go around 25% for daily purposes. Mine is less than that. Haha, you need to come down then! Haha thanks bro! I'm really diggin the new attitude it has now. I'm always turning heads on every drive. Thank you sir That car is Keith Pride's ride. He drives a Scion TC. He is actually the loudest in the state with that setup, and is only one or two behind world record currently. I'm really proud of him. Thanks!! Haha NO! Well, maybe, if I was it would only be 65% or something lol. Thanks Chop! This camera man was dope.

LMK if you don't find a buyer Will do!

No, not bad at all, like I said, I would buy again if the situation called for. Its a great budget amp. But I'm comparing it to what I've heard thus far, which in its defense, isn't really fair I've seen them smoke a few subs, and it was easy for me to clip in my application at the time. But all of this is user related. As Ricki said, if set up properly, it will work fine for as long as you have it. But when you do things like, run low voltage, or low ohm load, or try to push a 3000 sub with a 1200 watt amp, then things are not as good for that application, if that makes sense.

very cool.