spl_eddie

fs - 37 hz qms - 8.63 vas - 1.74 ft^3 revc - dual 2 ohm qes - .86 sens - 86.4db 1W1M qts - .78 bl - 20.2 tm

kind of losing sight of topic. i really want to build a nice sturdy box for these that shoot hight numbers. im not much of a arguer. sorry

fs - 37 hz qms - 8.63 vas - 1.74 ft^3 revc - dual 2 ohm qes - .86 sens - 86.4db 1W1M qts - .78 bl - 20.2 tm heres all i could really find. but like i said they have sig soft parts in them. they are MONSTERS!!! i'll put pics up soon. any idea would be great. i live indianapolis if anyone wants to give a hand

nick, whats the best box design for a btl in an suv. i read some of your old stuff. what were your designs. ive been through about 4 boxes trying to get it right. help a brother out pls

hi, i have two 12's i made out of wmd motors (the tripple stacked ones) and mostly sig soft parts. like i said i have two of them and two 1500 watt rockford amps. this is going into my durango. i would like to hit high numbers with these. i have tons of room back there and a 2400 bat. i just need help designing a box. thank you all in advance!! eddie g

Hello, and thanks in advance for your answers or comments! . ok. i have an older style fi btl 18 fully loaded. i blew it. i have it taken apart and the ring where the foam lip is located is completely clean. 1st question. 1. what is the best method to remove the leftovers from where the spiders were. ( about 1/4 inch of spider and alot of glue) i tried to use a dremel tool but it made bad odors that i didnt think would be good to breath in. i also tried a metal brush in my drill "was going VERY slow" and a knife didnt work well either 2. what type of glue do you use when you recone and is it something i can pick up at any hardware store? 3. is this something not to hard that i can do myself or should i send it in to be done. i think im pretty good with most everything i do. Thank you again!

im in indianapolis! wooo. is anyone else on here from indy btw?

holy jebus batman!!!! cant wait to see the rest :-D

it's not under warranty anymore. so there is no way i can repair it myself?

Ok, i have a pioneer avic N3 but the rca's are bad on the unit. how do i replace them or repair them. i have used a line output converter but i really dont like to use them. any help would be great. THANKS!!!!!!! Eddie G

i have the 08 model. i was happy with it until i got a big system. this unit doesnt have a good anti skip. if you going to be making alot of vibrations invest in an ipod or a better deck. alot of features on this unit though. not bad for the money. Eddie G

thanks for the tips. ya the stuff sometimes jells up if i use to much hardener. im using the bondo brand. what is a good brand to use? and the heat. on one batch that i had to dump i dumped it in aluminum foil and covered it. about 20 minutes later not thinking i picked the foil up to throw it away. WOW was i in for a surprise. that was HOTTT!!!!! i will get the pics posted today after work. thanks! Eddie G

Hey everyone, hows it goin. ok, so today i started my first ever fiberglass project in my little brothers SUV, it's a mitsubishi montero. im putting a single 10" mtx 5500 single 4 ohm woofer in it. he listens to rock so i figured a 10 would be perfect in a sealed enclosure. today i went to the store got all the resin, hardener, mat, brushes, aluminum foil, making tape, ect ect. ive never done this before but i have read alot of forums on it and thought i would try it out. ( not in my vehicle of course ) so far tonight i got the foil layed in the area i want the enclosure. after i got that how i wanted it i put a quick thin layer of resin down then put the mat down. i learned fiberglass dries VERY fast and you need to prep a small area that you plan on doing RIGHT AWAY! and be prepared to go through a few brushes . and i also had to dispose of two mixes i made that i put to much hardener in, i can eyeball it out now to where it suites me! anyways; after i figured out how fast it dried i started prepping the area right before i layed the mat down and pressed it down with the brush and then brushed it out. seemed to work very well. i got two layers of the bottom down. i do have pics< i will put them up tomarrow!!!! if you guys have any input or suggestions that would be GREAT!!!!! thanks in advance. Eddie G

im getting an alarm sometime soon. my truck got broken into 3 times within 2 months. wooo the ghetto sucks. lol. i have a factory alarm. they were ripping my stuff out with the factory alarm going off. i dont like the alpine type R's because the s's and the z's are pretty distorted. im going to look into the other speakers you guys have been telling me about. keep the idea's coming please :D thanks. Eddie G

high output.