ncacoates

The holder you just put on. I put almost the exact one on mine and it fixed the major hiss. After i twisted them together its completely silent. I still think im gonna get a couple ground loop isolators and run them.

you just like giving me shit

looks good man! Iv had white leds in my cup holders and center console for awhile now it looks pretty neat.

I did the same thing you did on my avic unit. Its the holder it doesn't make good contact with the fuse. I just twisted the wires together for now till i find a better solution.

Not really my thing, most the time people ask why i turn it down when coming to a stop. I just don't feel the need to annoy others that don't appreciate my love for bass. I can gladly say i don't do it in neighborhoods, apartments, or any establishments of the like. Though i have picked on a fair share of badasses that claim they have 190db+ at the headrest. I always get a kick out of there reactions.

Dont look half bad to me. Last i checked they were made by Maxxsonics though.

unless your gonna step up the charging system to charge at 17v or more there is no point.

My personal opinion would be I-cons. Not the i am against sa-12s but i feel the I-con is far more tested and proven product. They sound great and have some outstanding lows.

i used an 150A for a good while till i got around to getting a 250A. At competitions i use a 150A for my class and do demos and what not with no problems what so ever.

two dual 1ohm subs .25, 1, 4 two dual 2ohm subs .50, 2, 8

same here bigjon 1200-1300 seems to be there happy place. now i have sent more and it was fine but no real output was gained

you can but you'll need a D2 sub to get full use of the power. If your 100% your gonna get 2 12s eventually make sure you get D1 subs. That way you can show the amp a 1 ohm load with both subs.

Maybe you should let me play with idk 10 or 12 of them i could have fun.

Jake has a lot of reconed SI BM 10s for 60 a piece if you decide you want 10s anyways. They sould be a really good sounding driver.

Best bet is 2 Q15s. Be able to give the plenty of breathing room. I came up with a simple box that would work well. 8cu/ft after displacement, 123 sq/in port, and its tuning would be right at 32.

Should be ok but you need to be safe the knu CCA wire is only rated for 250A. I don't ever see it being a huge problem considering your most likely never gonna pull a consistent 250A through it. Run a 200a fuse on the 2500 and a 50 on the other should be plenty fine. I've run a 150A fuse on my 3000d for weeks and yet to burn it up.

Cant believe i live like 15min from jakes and i missed this haha. pretty sick man id love to sit in it for a few.

awesome install wish i had those skills.

Aero ports can be made from pvc but you'll need to make a jig and calculate the proper radius.

Have to talk to Db-r cant really tell you what the problem is. I have yet to ever see one with a flashing power light. May be as simple as something wrong in the protection circuit but i cant be for sure.

holy shit that girl is good

good deal that always works too.

Only took like 6 months but here ya go guys.

Its a far more efficient design. It makes far more power than the sae-1200d at the same time it does it at lower voltages.

Looken damn good guys. Pretty sure i saw your truck at jakes when i stopped by one day. wouldn't mind hearing this thing in person one day.