iangellopez

what do you recomend for filling them??

ok, let me start by saying this is my first time using deadener. so i working early sat. morning on my door, thanks to SS on the free door pack. Damplifier Pro, sorry for the kinda bad pic lol Driver door stock without plastic cover inner door, this was the biggest PITA to put on, i also managed to cut myself with the deadner lol some more deadener All done with driver door stock plastic cover back on the install of the driver door took about ruffly 1 hr. it was too hot outside to continue on with passenger door lol. will finish passenger door next weekend. so far i dont have any speakers installed but road noise on the driver side is noticibly(sp) less then before. i used a total of 3 1/2 sheets on the driver door.

lol every forum i have posted this on has asked me that , no its not on the outside, i sprayed the soapy water on the outside so i can lay the tint down and cut it then i lay it up on the inside. thanks man.

i finally got around to tinting the car lol 20% all round cept for front. i also took the rear deck out and will start working on the doors.... the pods are going to house a 8", 6" and tweeter. rear deck will not get used any more lol.... was a waste of time and money

thanks everyone, i have yet to get started on the doors. been busy with other things, but, i should get around to the door sometime soon.

i have a pair of bullet tweeters in my car right now, and they're not that harsh. they're only seeing about 35 watts tho......

what's wrong with bullet tweeters?

bump, lemme know what you think.

if you want loud go with some PA mids and some bullet tweeters..... look into some o2's or beymas

yea i have to get around to doing that

finished pics..... lemme know what you think.

the rear deck is finished, its painted metallic charcol grey with a coat of clear, came out pretty good. now i can start working on my doors the the buil is going to be placed on hold. ill post some pictures whenever i go to my sisters house, i dont have a camera right now.

hello

x3 and the most important part is to be patient and not give up.

thanks guys, again i did do some work sunday, i just threw on some paint so i can see where i have highs and lows better, didnt get any sanding done tho. so right now it sits in the car temp. painted. have to upload pics to photobucket!

x3 on the 200.4... 30" aint that big go for it jacob! lol

x2 im going to be ordering these in acouple of days posibly.. also why dont you just fiberglass the bottom half of you door to acomodate the 6.5 midbass u have now.. wouldnt be that difficult

did some more work on the rear deck today... ill upload pics later..

Bump for updates.... got a bit more done, just filling and sanding and a guide coat. That is all....:cool:

yea they are rated at 13.8v, its either one of these or a mtx ta-7402

im thinking about ordering one of these amps to power my mids, i would like to know if any of you guys have used this amp and what are your thought about it and if it does rated power. thanks

Yes. I doubt they will remain here for two weeks... I have a few used newer case 1500s that I have not gotten around to listing, though. They are not quite as cheap, of course. i have hope lol if not i guess i can take one of the new heat sink models if u still have some lol

those prices shipped?? if they are i might be able to take one of those off ur hands in about two weeks

jacob how much for an old one? oopz nevermind saw u only had one....

heres the speakers all together lol, i think i went a little crazy when ordering them oh yea and i got those bullet tweeters for the hell of it lol, i wont be using those.