jellyfish420

i think the two in the .77 each would be fine, but the 3 8's is definatly an idea...

but w/o denting the cone....or ruining the sig???

try again a-hole

my 2 dbx's wired @ .5ohm. playing a couple sweeps i uploaded it to google too, so as soon as its up i'll post a NON-COMPRESSED link http://www.realmofexcursion.com/videos/Sou...dbextreme.2.wmv

probably won't last if you do something dumb like this..... http://www.realmofexcursion.com/videos/Alpine/typer15.2.wmv

da

i smoothed out the glass a little and layed a quick layer of bondo...lookin pretty good

well since noone picked the e12a.22 i'm gonna say LMT?

i did 151.1db on the old TL w/ my 2 15 RL-p's

hmmm....staples? never seen that before looks real nice.

i'd be in the street max 1-2 also wouldn't i? 2-15's...but my box extends past the cargo area

its a silver paint marker aint it? i'd say don't screw w/ it...the polish may smear it.....

i started today by sanding a little, then laying one last layer of fiberglass cloth. then i went and fiberglassed the inside alittle. last i decided that i was gonna customize the grill a little. it'll look real nice once i get my g/f's 10" RE's for my doors :up2somet: ............

or running a seperate amp to each coil but i second the y adapter, all tho not nessicary....

pre db extreme.... the post buyout are the spl extreme

well i don't really wanna take that one off. (fear of breaking something) were would i get them?

why would you want to clip it?

i'm not to big on the shiny dust cap. could i get a boob and glue it over that one? if so where would i get boobs? it wouldn't change anything would it?

the fuses are good. thats the first thing i checked. i plugged it in and was testing the transistors, and they looked to be good.....till i dropped the probe across 2 leads now i need 2 transistors, and something else. and i couldn't find a schematic. know where to find one?

i'm gonna go get some bondo today. everyone is always talking about mixing stuff w/ bondo. what is it? i think its resin. if its resin, do you still use the resin hardener? the bondo hardener? or maybe it was bondo and sawdust?

it looks like there was barely any glue on there to begin with i'll fix'er up here later today. but none the less

i know its a bunch of work...but its ok. it'll turn out looking sweet as ever and they're not small sealed, but actually IB. the hole matches up w/ the one in the kick venting it to the inner fender well...

LMFAO...thats the old sub from my HT

and here is a quick spec comparison db extreme--------------------RL-p max 2500w----------------------1200w(?) rms 1000w-----------------------500w fs 38.2--------------------------27.487 vas 2.305ft----------------------5.253ft qms 4.594-----------------------3.728 qes .465-------------------------.508 qts .422--------------------------.447 xmax 14.35mm-----------------24.6 spl 99.9--------------------------89.67 @1watt rec box ported 3.3ft^3--------------------------2.5-3.5 ft^3 27.5in^2 port @ 45Hz----------35in^2 port @ 28Hz sealed N/A-------------------------------1.5-2.5ft^3