ryruss

i realize the R stands for reverse post, the + and - are reversed, but how do i know to purchase the 5100 or 5100r, do i just look at the stock battery and match it up with the picture on ssa???

i just purchased the eclipse cd7200 witch has 3 8 volt pre amp outputs the only downfall is no internal amplifier but if your running amps on your speakers this unit is golden

what is the difference between the powermaster 5100 and the powermaster 5100R...they look as if they have the exact same specs

does anyone know about cadence cd players....im looking into a new deck, im on the website and they look good. every single head unit has 6 volt pre amp outputs! anyone with experience or heard of these decks?

ok thanks

ahhh didnt mean to do that

taking any suggestions on good side components for 2003 grand am...4x6's and 6x9's. does anyone have any experience with infinity kappas or no anything about them...? they look like good side components

and what is clipping? lol

what is setting the amp to o scope?

ok ill wire it to 3 ohms..... but no its not the jl audio 13 inch w7 is rated at 1000 watts rms, 2000 watts max

so the best would be to wire it to 3 ohms at arond 1,200 watts rms cuz the w7 is rated at 1000 watts rms and 2000 watts max ??

.75 ohms at 3000 watts will blow the w7 htough wont it?

ok. i think the w7 can even be wired to .5 ohms also. but i should wire it around one then?

so with the saz can it even be wired to 1.5 ohms witch is what the 13 w7 is. or would it be best to wire everything down to 1 ohm?

ok! thats what i like to hear lol. it was funny when i bought the amps....i got an email saying "Thanks again for your business! You got the last two 3kd's in the world from sundown" i was pumped, til i found out about the 3500 lol. o well upgrade in the future!

well im installing this amp in 2 vehicles....one to power a fi btl 15 and one to a jl audio 13 w7.....it can be wired to meet the max of each of these...correct?

i know this but i have a fi btl 15, so i wont have it installed to pull 3000 watt rms....what the saz is capable of

well i already have a 220 amp alternator i bought. and i have a pioneer premier deck that tells me the voltage so i should be good, thanks

well im gonna turn the amp down cuz im only needing 2000 watt rms. so pretty much put an upgraded battery in the front cell the one powermaster in the back for the subs?

is one powermaster 3100 in the front cell enough for one saz 3000d? or will i need one powermaster in the front cell, and one in the back of the vehicle. i should be pulling around 2000 watt rms

good enough for the girls i go with!

what is the pre amp voltage in deck do? what would be the difference between getting a 4 volt pre amp deck and a 5 volt pre amp?

ok they list it as 1 pound for free shipping, understandable, thanks

ssa where they are 750 right now

sundown audio.... * Model: SNDWN 3KD * Shipping Weight: 1lbs * 88 Units in Stock * Manufactured by: Sundown Audio