dave_Edwards

you mean to tell me people still mess around with L7's?---damn----what is the world coming to?

my next HU is the Eclipse CD-8454

liquid cooling----electralite free water and a CPU pump will work with a AC/DC converter------at least this is what I am doing in my next install.

also---can you tell us how you have your subs wired and what ohm res. they are(duel 2, duel 4 or single 4 etc.) that would help alot.

well--------they are not made anymore----and went for about 369MSRP or something close to that-----I worked at Ampman.com and got it ALOT cheaper.

or just buy my Ampman/Adire Revolution 1500 524x1 @4 ohm 1090x1@2 ohm or 1587x1 @1ohm

If I had $1000------I would go with 1 more Phoenix Gold MS1000

nice amp-----man it seems the longer I am away the bigger everything becomes----

this past year was my first in car sales----alittle over $85K---not too bad. top salesman in SW Virginia for Dodges/Chryslers

CD8454 is what I am going with in my 05 Magnum AWD RT

If you do the airbag idea---your car will not pass state inspection---since it is a saftey item-----try a under the dash enclosure for it with a stealth cover to cover the front and the controller ports.---just an idea.

ngsm13 sorry to hear about your problems----it sounds as if you had a few shorts in your system----even with your key in your pocket your car still has electrcial energy in it----next time---pull the fuse inline or do what I do---disconnect the battery----even for minor things it saves alot of blown fuses and alot of heartache in the end. do this---hook everything back up----but this time leave the inline fuse and the battery disconnected----that should be all it takes---and if you need anything else---ask hope this helps, Dave

I have desided to go with the RE 6.5's midbasses I have in the doors(well dampened of course) and the tweets in the dash location---with the Brahma 15 in a FB enclosure sealed and finished in the same leather as my seats(light greystone) and the crossovers in one of the cargo compartments on the side also finished in the same leather and the EQX on the other side and that ALSO finished in the leather----the "second floor" is going to be plexiglass and the amp turned rightside up(showing white to match the car) any thoughts?

I picked up my new ride-----a 2005 Dodge AWD RT Magnum-----Cool Vanilla----got it for a great price since I work as a Dodge/Chrysler salesman. man---the MS1000 and Brahma 15 are going to be happy in their new home

I will say that there is alot of good points bought up on this topic---one of the best reasons for a larger enclosure is less power is needed to power the sub----which saves the electrical system-----plus you can add more port area easier to a larger enclosure----the other is deeper transist response---- I think all you guys hit the nail on the head and pretty much covered everything. mrray13 is right in saying that it lowers powerhandling and increases eff. now I will shut up

any more thoughts on this---I wanna say my piece

That was one of the perks of working at Ampman.com----I got to test ALOT of stuff(got to keep some of it too---cheap)

My list is this 1----Rainbow Referance 6.5's 2----Adire Koda 3----RE 6.5's 4----Alpine SPX 177a 5----Helix 5.25 comps the Rainbows sounded GREAT with anything I could throw at them. The Kodas had the most midbass I had ever hear from a comp. set---that is until I heard the RE 6.5's----the RE's being cheaper and not as hard to install(the Kodas are deep) made them my fav. to this point. The Alpine's I had where some very good sounding comps.---I love the crossovers---alot of control. The Helix's(in my wife's ride)sound natural and smooth----yet have good impact.

Good amp there----I kinda miss my old MRV 1507

you gain nothing after reaching full XMAX----you are just slamming the VC into the former----not gaining any dBs at all.

why do you think you need 1200 watts on a Brahma?----yes they can hold it but you have to reolize you will have to do some major overhauling of your electrical system to run 2400 watts for just the bass and what are you planning on for comps up front? What size enclosure are you going to run your Brahmas in? read up on this http://www.adireaudio.com/Files/BrahmaPowerHandling.pdf then you might reolize you don't need that much on your sub-drivers.

within a fraction of a dB or so.

here is the TRUE way of metering an amplifier http://www.concept-intl.net/download/measurwatts.pdf

as for SQ----Eagles "Hell freezes over" is a good set up CD as is Enya (only time) I also like Dire Staits"Brothers in Arms"

maybe on the first runs of the Brahma's----the new ones (Mark II) are very well built--- the differances in the 2 are simple---- Fs----- The Brahma has a lower Fs so it will be leaning towards the SQ side---the RE being higher Fs will be more SPL based----both have XBL^2 motor tech---a flatter BL load for both is always a plus over alot of other sub-drivers. It is really what you are looking for and what you plan on using them for----IE---enclosure size---power applied-----enclosure design.