ANeonRider

Rest of the drivers came in today. Big thanks to Sean (///M5) for the hand!

I'm going to bring out the Fluke as well, and see how much AC ripple I am getting on my DC voltage.

I've run a new 4ga. wire from the alternator to ground... but I'm going to run another to the battery and see if that helps any. I have not yet upgraded the + wire from the alternator... going to do that tomorrow as well.

I'm having this problem with my XT1600.4 Help?

The amp in his avatar is a PG Xenon 600.1

Ok.. I am STILL having noise problems. I have sanded to metal the following: 1) Battery ground to chassis 2) Amp ground to chassis (common ground between both amps) 3) HU ground to chassis I still have noise with car on, and car off (much louder when car is on). Signal path: HU > optical > H701 > 3ft RCA run > amps I removed the RCAs from the XT1600.4, and the noise was still there, so that eliminates the HU. The puzzling part is... the noise disappears after the amp is warm. If I use the amp for a few minutes, the noise completely disappears, and does not reappear until I leave the stereo off for an hour or so. The noise will change pitch if I use other accessories within the vehicle, while the noise is present. Once the noise disappears, nothing I do brings it back, unless I leave the stereo off for a while. I'm not sure if the noise is also present on the XT2000d yet, I'll check tomorrow if it is... I have already moved the ground for the amps because of this problem. Maybe I'll have to do it again Any ideas guys?

BL... by a lot. The Type X is not a "get loud" subwoofer.

IMO... in your case, a single 12" or 15" would be ideal. What load does your amp output 800W into?

Not in the HOP... but definately in the Fi forums... and a thread about the Rli-8

What is with the ca.com drama in here? It can stop NOW.

That is cost... or how much Alpine sells them to business' for, which might have gone down since then since our dollar is ~0.94US now.

www.knukonceptz.com They do sell the pieces...

Why get a kit? Just piece it together.

You need to learn how to use Excel... click on the SEALED tab.

http://aneonrider.com/Misc%20Files/Enclosu...alculations.xls

Bought a Jasper jig from Mark... now my holes are going to be round.

Ported? Sealed? Space trying to fit it?

Birthday!

Just found out a dude I grew up around passed away almost 2 years ago. Fack... nothing is worse than hearing this years after the fact

H701 = $400CDN cost C701 = $200CDN cost

http://www.soundsolutionsaudio.com/forum/i...=7964&st=75

TOP

Uploaded!

Peerless' got here today!

Peerless' got here a minute ago... uploading pics!