johnecon2001

No, you're supposed to match your fuse to your wire. And match your wire to your amps. If you have 200a~ of draw, you need 1/0awg. For 1/0awg fuse at 250-350a.

Could go with two 100.2's. It's been said the channels put out more than the 100.4.

I'm going to stay with the stock 17's. No sense in going larger (or smaller). And I like the way it looks now.. so screw paying for something else lol

HD65 should project full 1080p as well. It does have the option to downscale to 720p. Although.. why you would do that..

Next is to buy my O2 simulator and install my Doug Thorley Long Tube headers -try and regain some of the power lost in the lift. After that.. maybe a muffler, and Tires. That's it though.

Max dimension. That's where a measuring tape comes in.

On the actual Drive shaft. There was a Double Cardan option that I opted not to get, simple because I don't plan on lifting it higher than this. 3" should suit my off roading needs just fine.

Tom's drunk.

But it's night time Maybe after my trip this weekend to Sedona.

Its small, and cheap and has the newest HDMI version. Not to mention it does 1080p and has the newest DLP chip. ftw.

New coils with a small spacer up front on Bilstien 5100 shocks. Add a Leaf in the rear, again with 5100's. Added a new Tom Woods one piece drive shaft. Supposed to be 3 inches taller at the suspension, but it is taller than that all around. Overall ride is better than stock. Woot!

Glorified LCD if I understand Wikipedia. http://en.wikipedia.org/wiki/SXRD

Quoted for Truth.

14awg would be plenty.

I love your name badges you put on the boxes. Adds a lot imo.

Here: http://forum.realmofexcursion.com/showthre...sundown+audison

Yeah, that'd probably be the best option to get the most out of your trunk space.

contrast ratio/lumens importance depends on they type of projector you get. With DLP, I'd go with higher lumens and less CR. vice versa for LCD.

Y2K anyone?

Google Sketchup seems to be popular.

I think we just found your problem

^ precisely why I like to buy an enclosure of my liking and then insert a drive that best suits my needs.

I'm partial to the HD65, but here is a comparison chart of all four: http://www.projectorcentral.com/parts_comp...&pid_4=3433 Also be aware that the DLP (both optomas) will more than likely provide you with better color than the LCD's will. The HD65 is also the lightest at 4lbs.

USB2.0 has a higher burst rate at 480mbps, while firewire is limited to 400mbps. That makes it seem like USB is better... but in reality firewire has a faster constant rate than USB. But not everyone has firewire, so USB is fine. And if you're not doing any video editing or audio recording to the drive, I doubt you'll notice a difference on your day to day uses.

3.5^3ft for each 15" SPL monster? lol