mrray13

will sqguyib ever stop? shit, he needs to be at the chithole, holy mother of jesus hisself!!! dude just won't let it sink in he's a freakin idiot...lol wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

sqguyib...please, just stop. we've shown you where you were wrong, even if it was just in poor grammer, but you keep going. but poor grammer can change the entire context of a written conversation, as we have pointed out to you. oh, i think richard clarke still has that $10k challange if one can tell the difference in amps at the same power, maybe he'll adapt it to telling the difference in 5 watts of power? and CEA rated means about as much as EPA rated fuel mileage. noone wants to call you an idiot, but damn man, you just keep opening the door. audio-neon, my name is Kent, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

that's why he's going to do three, lol. 1.5ohm for the win....though i think 4 (and .75) would be better (hint, hint) and just .6ft^3 sealed.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i wonder if would get sean to test that theory. i'd be willing to be you are correct, the smaller box resonated at/near vehicle frequency. all boxes tested were single layer 3/4" mdf, various sizes, all tuned 45hz and only difference were size and port length. this jsut hit me as well, smaller box= less impedence rise= more actual power. of course that means more heat, which could result in a wash..lol... damnit man, you got me thinking too damn much. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

could be. and i can't really argue with hoffman, but as i said, i've seen what would appear to be a direct contradiction. can't explain it, but the meter showed it. if i had ///M5's equipment, we could definitely find out what caused it. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

and to you ryan! awesome buyer here...HOWEVER... you've professed love for both steve and aaron, yet none for me? i know we haven't had a "transaction" in quite awhile, but???? lol, just kidding. and this is late, but adrian_d is great to deal with. as is dbfan187. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

get tom up, have him stick his face in the water..... "theys is some fucking bigfeet gus!!" though i might have misquoted that, been awhile. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

well, i never heard anything back, so... i guess i'll stick with the jvc we currently have, for now anyway. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i just had blueberry pancakes, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i can indeed relate details of nothing more then going smaller box and gaining spl. with nothing else changing, including voltage, power, box location, port area/tuning and subwoofers. i can't explain it, but i have indeed see it happen. maybe it has something to do with the longer ports, i dunno, but i do indeed know it has happened. the rest i completely agree with. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Most of the stuff was from people not reading my posts and replying. I don't recall the last time I got hunted down like that. To assume someone does not know what running ported or IB subs is? And then quote the post and cut out the part that explains the use? again, and for the last time, the post that was quoted DID NOT explain two different setups. it wasn't until a LATER post did you somewhat clarify that it was different setups, and even then, it wasn't until we directly called you out that you specificly stated it was two different setups. and for the record, i even requoted your post in it's entirety from the point in question, and NOWHERE in that post was it stated two different setups. is your typing, thought process, so bad you can't even understand what you are saying? your posts are indeed what we pay for them, nothing. don't turn this around when it can all be brought right back up showing just how wrong you are. let it lie, or get made a fool. your choice. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

the rl-i8 likes .17ft^3 sealed, i'll wager the orphan's are in that ballpark. box barely big enough to hold the thing, lol. i have a .17ft^3 box for my rl-i8 and it sounded awesome in it, with as little as 100wrms to as much as 750, in car and in room. i bet three orphan's off a sundown 1500d would be badass!! and tiny!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

tips for the big three... DO NOT replace any factory wire (unless needed), just add. if you find a simple route the factory took, follow it with your own wire, but do not remove the factory. just make sure it's agood, clean (if possible) location. battery - to frame: can be anywhere solid. but look for the factory location. it's usually a bit easier, but again, make sure it's a good connection. battery - to engine/ or engine to chassis: engine location is easy, grab an alternator bolt. on my 04 silverado, and even my 08, one bolt is even labeled ground. run that to the same chassis ground you found earlier, or to the battery, whichever is easier. battery + to alternator: pretty self explainatory. also, what amp are you using again? and what voice coil configuration is your sub? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i have a tl (for now, lol), but not this cheap meter. and no way i'm waiting that long to have one shipped. if someone was close with the cheapo... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

welcome paul... and we can't get enough pictures around here, so keep'em coming!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

small box and HUGE power make spl numbers go big. IIRC, it's called compression porting, or something silly like that. but i'm dead tired, so i might not have a clue, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

http://www.soundsolutionsaudio.com/forum/i...showtopic=18667 pics of my gift. it's a blast to plink with. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

yay for me! ruger mkIII w/ barska red dot. has a 5 moa dot when cranked up, a lil big, but it'll drive nails at 25yds and stay under 2" at 50yd. (off a rest fo course) not bad for a 60(maybe older) year old design and a cheapo optic, lol. what i see when it's pointing at some poor squirrel, or rabbit, or dog, or redneck idiot...well, maybe not the dog. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

man, this sucks, lol. i'm going to take pics of my dad's day gift, y'all wanna see it? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

my bad, i thought the bl was rated for 1500. i was wrong. don't listen to me then, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

off 1500wrms, the BL will be a better driver then the BTL, so don't bother. also, the 18" BL should more then own a 15" nightshade, all other things being equal. if you get an 18" Nightshade, then??? anyway, with what you have presented, the 18" bl @ .5 on the sundown will be your best bet, providing you can provide the needed enclosure for it. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

tired? i dunno. maybe it's just the fact they are playing kobe like a glove. but it's definitely not going the way i thought. blow a 20plus point lead, all in the 3rd quarter? might just be teh celtics year wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

hurry up two weeks!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

hurry up two weeks!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

nice!! i wish i had not worked 16 hours today, lol. anyway, i still might be hitting you up for an orphan or two. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee