mrray13

looking good. can't wait to see this finished. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

lol at jim... tuning at 28hz, you might as well go sealed. to be honest, i hated my 28hz box. while jsut about every sub sounded good in it, output was lacking, and the bottom end wasn't all that reinforced compared to a larger sealed box. personally, i'll never tune below 34hz in car again. seems to be a magical number as far as sq and output is concerned. it always seems to offer a nice mix of both. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

yeah, steer clear of durangos. blazer or explorer, and while i'm a bowtie guy, i believe the explorer's are the louder of the two. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

thank you sir.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Kent, call this number and leave a message. Nick should get back to you shortly, if he doesn't let me know. i don't see a number....lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i have thought about going that route, i dont know, nothing that big will be done for quite a while so i've got plenty of time to decide. and it's a 3 speed get those pics up! lol, i'm lazy, i tell ya. ok, 3 spd. i'd lose that, lol. but i'd still turbo the 6. was talking about that yesterday, everybody agrees. be different. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

personally, i'd try 1.25ft^3 sealed, no polyfill. teh bigger the box, the "looser" the sound. while a big sealed box is going to be nice and boomy, it'll also tend to be muddy for the fast stuff. my rl-p absolutely kicked ass in 1.25ft^3 sealed. yep, ported will definitely get you louder. 1.5-1.75@34hz would indeed kick ass. DON'T turn up your crossover point though. leave it at 80 or under. anything higher, and your getting into midbass, and the rl-p isn't a midbass driver. for rock, i think you'll like the 15.-1.75@34hz box. it'll till drop low, but it'll nail those kicks!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

no reply from jacob. anyone help me out here? i've got a gentleman wanting a box built/designed and i can't complete that without those dimensions....... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

yep, flare does indeed factor into length, as it is part of the surface area. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i've not heard anything from rd, but i've had the pleasure of listening to the mag. and that thing helps to define the term LSQ. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

soundsplinter. because mike is too cute not to buy from, lol. in reality, i don't have a clue. both mike and scott are outstanding people, both have far better then average customer service, and both provide killer product at killer prices. i'd have to say buy the one that better fits the budget. meaning, cost of sub, amp, install. otherwise, i don't think you can make a wrong decision here. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

the q at the lower power for sure. the 9515 at the 3kwrms easily wins, IMO. personally, for what your after, i think the dd sub would be your best choice. build your box with a changeable port and i don't see why the dd can't provide enough sq/ output to help one win in both fields. especially since your going to need a strong front stage in order to win sq or really good output from the subs to make up the points. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

like kinda touched on in the post above, when you do the big three, you're not replacing anything. your adding too the factory. you leave whatever is already in place alone, and simply add the big three to the existing factory wiring. if you wnat to run from your alternator to your rear battery, i don't see an issue. make sure you use large enough wire and if your super safety minded, fuse on both ends. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

cool, glad it's worked out! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

looks good tom. i dare you to do something different! instead of the typical SBC or BBC, turbo that 6. leave the 4 spd, and make that 6 scream. be bold, be different...be the yeti we all know you are!! and your making me feel lazy. you just get yours and already pics are up. i still haven't even taken pics of the fox body.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

the dual or jensen are pretty damn equal in all aspects. i've installed both more then a few times over. seen both have similiar issues, but mostly due to customer abuse. the valor piece we now carry is better then both and the same price. it's made by the same people, but doesn't require a toggle switch to see video. simply ground the parking brake wire. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

don't build until you know what brands you are going to carry. you are going to want your customers wanting what's in your vehicle. you build with products not in your store, your basicly telling your customers that what your store carries isn't good enough for your ride. when you do decide which products your going to carry, only install the top of the line stuff. make your install all but out of reach, they'll want what you have and will go to great lengths (and dollars) to achieve what you have. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

possibly going the 17th of next month at evansville. was asked about it yesterday, they are trying to get tickets today. friend scored 8 tickets this morning, so hopefully, i'll be going as well. otherwise, today sucks ass. shop is dead, just two of us here so i can't leave early to ride. sucks ass i tell ya. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

pm'd jacob..waiting on the return, lol.. and i bet your right ryan1...on the hiccup that is. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

T.O.P.P.A.G.E. yep... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

have fun and be safe sean!! enjoy your weekend! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

wow. he should spend some serious time in jail. that just isn't right. must have been good stuff in those brownies though. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

holy chit! that was just too cool..lol!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

ATM no big deal? that's what i'm talking about, lol, the real dirty..hehe 68-72 c or k10 is absolutely the best looking truck ever made. the fucking idea to put the gas tank behind the seat, in cab? the dumbest thing ever put in a truck, lol wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

ramos..we need a vinyl wrapping photo lesson. i suck at it!! btw, nice install brother ramos!! sorry about the minor topic theft.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee