mikel7829

We are getting a buffalo wild wings nearby...I heard they was good but never ate there.Other sports bars around they go for about 50 cents each BWW is some of the worst wings around. I will keep that in mind when somebody asks me to go there...Money saved if they are shit I never tried them,thanks for the heads up!!

Same to you brother!!

So you'd eat that, but you won't fry your own wings?The wing thing is funny on another level. Do you think that a vegetable in a deep fryer collects more fat than the skin of the wing? Think it is bad fat? As with any cooking keep the damn oil/pan hot and it won't be a shit show. Wait... WTF. Just read and believe Sean. You can cast iron it if you don't mind a splattering. :-) My ears are open he seams to have some knowledge in cooking And I absorb any education I can...

Same to you brother!

We are getting a buffalo wild wings nearby...I heard they was good but never ate there. Other sports bars around they go for about 50 cents each I'm not a fan of BW3s. We have them here and Wings Etc. I LOVE Wings Etc! Their low cal plate is great! All we have around here in probably a 40 mile radius is a couple of mom&pop sports bars that sells them..And of course your regular pizza joints menu and thats about it.

Yea to bad their electrical tools do not have a lifetime warranty..Love the warranty on their hand tools though..But I was pissed when craftsman stopped making sheet metal snips that had a lifetime warranty..Then they started carrying Midwest "though Is great snips" they have no warranty..and on thicker gauge metal it is not uncommon to snap a chunk out of the jaws of a set of snips

We are getting a buffalo wild wings nearby...I heard they was good but never ate there. Other sports bars around they go for about 50 cents each

Rigid is some good shit ! Good find..

A carpet streacher is about the only special thing you will need..as far a skill if you can read a tape you should be good to go..Not quite. Seam iron, tucking and cutting tools, adhesives, you have to know how to read the weave, proper tensioning and stretching techniques, etc. You can install any way you want with any tools, but do it correctly with the correct techniques and tool, and you extend the life two-fold. I guess that makes sense..I have not laid a whole bunch but the ones I have as far as I know never had any problems and didn't look like shit Also I guess that the fact the carpet may have a warranty that could be voided by not be installed by a licensed contractor.. Idk I just like doing things myself when at all possible I prefer tile and hardwood most of the time.

No doubt, especially when wings can be 10 cents. I make some great sauce, but I hate making wings. Also I'm Chinese at heart and love them Asian inspired and I do not know how to make their wings. They average about 50 cents each around here...I just thought it might be fun to try my own

Whats the best way without a deep fryer?

So you'd eat that, but you won't fry your own wings?The wing thing is funny on another level. Do you think that a vegetable in a deep fryer collects more fat than the skin of the wing? Think it is bad fat? As with any cooking keep the damn oil/pan hot and it won't be a shit show. So I need to go snatch a deep fryer?

Do you think this valentine gift would be good for a booty call..? I was thinking of getting a $1.00 McDouble and cutting it in the shape of a heart..And if she is good she might get a $1.00 fry or a apple pie $3.00 bucks at most beat that!!

We might actually get a good snow here this weekend

That is not deep fried, deep fried sounds great But I am going to try my best to stay away from the fried foods as much as possible

do you have a deep fryer?I have cast iron... Do you have a wing recipe ?

I always like doing stuff like that on my own if possible so I know what is done and what is not done..

You ever jam out to Elton John in concert?are you asking if he sucks cock?..bwahaha..lol

You ever jam out to Elton John in concert?

A carpet streacher is about the only special thing you will need..as far a skill if you can read a tape you should be good to go..

Menards will have shit cheaper than that. I got some frieze on sale for under a buck last year.Even cheap carpet is good carpet. Like audio, the key is application and installation. Get a good quality pad no less than 8lbs., and make sure it is stretched properly and seamed properly and you're good. Follow that with a professional hot water extraction cleaning every 6 months and it should last a decade or more.No local menards installs for me.Buy the carpet and pad from Menards, call a contractor to install.Not hard at all to install yourself...

I know...makes me want to start looking on newegg and tiger direct for the shit for a new desktop gaming rig that I would never have time to play...

Yes broiled or grilled!!

How much memory do you have installed? what OS,and how many slots available for use?3 slots, 6gb in 2 slots, Windows 7 64I would try changing slots I have seen faulty memory banks on motherboards....And remove a stick of DDR and try to boot, 3 gigs should be able to boot windows 7 what banks are the DDR installed in? And what model motherboard are you using?Michael Well I would but...After trying to run 3Dmark yesterday it won't boot. I can get it into Bios or Safe mode just fine. Figured that 3D Mark overheated and mulched the video card. Went downstairs to see if the fan was spinning....can't see shit so I touched it and burnt my finger. If I go into safe mode and uninstall the video card driver will it use the equivalent that it uses in safe mode to boot into windows? Figure that would confirm my suspicion if I am not nuts. If that is the case I need a video card. Photo editing, internet and some word processing so nothing major but I don't want it laggy. I would pay extra for a video card that had dual HDMI outputs in particular if they could run at different resolutions. I need 1920x1200 and 1920x1080 at the same time if at all possible. And don't forget to go into regedit and delete any registry entries from your ATI software,drivers ect.before you load your new graphics card software...I would check out som nvida based cards at newegg they have some good deals!http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&IsNodeId=1&N=100007709 600030348 can't I just remove the hardware in safe mode? I think your smarter than this Sean My honest opinion what I would do would be to visit western digital or seagate's website and get me some free H/D tools and low level format my drives that will re-write every sector back to 0 "factory state".. That fat32 or ntfs will not on you windows cd,, And flash your bios firmware interface revision that will re-write anything that may have targeted your bios cache...if you are unsure this is a shit video card or fan issue.. Only thing else I can think of I have no fuckin clue else!

How much memory do you have installed? what OS,and how many slots available for use?3 slots, 6gb in 2 slots, Windows 7 64I would try changing slots I have seen faulty memory banks on motherboards....And remove a stick of DDR and try to boot, 3 gigs should be able to boot windows 7 what banks are the DDR installed in? And what model motherboard are you using?Michael Well I would but...After trying to run 3Dmark yesterday it won't boot. I can get it into Bios or Safe mode just fine. Figured that 3D Mark overheated and mulched the video card. Went downstairs to see if the fan was spinning....can't see shit so I touched it and burnt my finger. If I go into safe mode and uninstall the video card driver will it use the equivalent that it uses in safe mode to boot into windows? Figure that would confirm my suspicion if I am not nuts. If that is the case I need a video card. Photo editing, internet and some word processing so nothing major but I don't want it laggy. I would pay extra for a video card that had dual HDMI outputs in particular if they could run at different resolutions. I need 1920x1200 and 1920x1080 at the same time if at all possible. And don't forget to go into regedit and delete any registry entries from your ATI software,drivers ect.before you load your new graphics card software...I would check out som nvida based cards at newegg they have some good deals!http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&IsNodeId=1&N=100007709 600030348 can't I just remove the hardware in safe mode? Do you have a copy of windows 7?