CBFryman

I would fuse your REM just to protect my HU...but other than that the HU's will blow before the REM wire carries enough current to melt the caseing...it is probably fused internally anyway. and the draw and amp had on an REM wire is slim, very slim...the REM's capasity should be able to handle a good number og amps before a relay is needed.

if you have access to one that can handle 1kw+ and thoes cost mucho denaro for us non rich (we are DIYers WTF to you expect... ) A Multimeter is the best way. www.JLaudio.com/tutorials

http://forum.soundillusions.net/showthread.php?t=51709 not getting much a responce...figured id try it in other bords...any help wouyld be great, thanks... PS 100th post here i think im no longer a noob... i think...if im no...shwate...if i still am...well this ranking system sucks on SIN its like 20 posts and on AF its like 50 posts...100 is a lot... PSS i love smileies...

Hate To Bust Your Bubbles... GM is playing the discount game...agian... Example... My dad was looking into traiding in the '03 trailblazer which is about to go out of waranty for an '05 Tahoe or Yukon. Before this deal came out the total dicount he could have gotten, all rebates included that where compadible with each other, was $6,000. Employee Discount is 2,000 Rebates are now down to $4,000 So you gain nothing 11k is on the new Cadilac or othercars that cost 80 grand so 11,000 off the top isnt going to hurt and you could probably get nearly equal in rebates...but thoes rebates ended just before this deal began... Propaganda to get rid of the '05 line up and get a good boost on the next modle year...if the discount lasts that long, im not sure... just a little FYI

i dont know about with Rl-P's but RE XXX's sound damn good and damn loud with 30-35Hz tuning but if you get much below that it gets bottom heavy and not as loud. And for Ava's, well lets just say i am tuning my 18 in the same are as you. If you want more SPL shorten your port you have now and just keep doing it untill you get desired results or it just gets to be tuned too high.

thoes DD mids are sapposed to be tah shiznet ya no hommie? My RE mids are pretty good and damn loud off of the stock HU. i saw your vids...pretty nice moving pennies on the roof like that. i need to figure out how to get vid loaded on my computer...after putting all thoes crappy speakers in one room in the post the comparison thread i had to blow at least one... so look out for "pioneer 6.5 v Sony Xplod 444 powerd buy PSU's" i played the intro to one of my friends songs who is an aspireing DJ, "DJ Loony" today i might get some audiobahn movement and play the whole song...its a pretty good beat. but...before you can see it i need to find my sofware

http://img.photobucket.com/albums/v201/CBFryman/Big3.bmp

sigh...diagram, do it like this (with fuseing) http://img.photobucket.com/albums/v201/CBFryman/Big3.bmp

all i have for now, when i get my Ava18 ill have my Ava 18, "Brahma" 8, Audiobahn 10's, and the subwoofer on my computer lol RE comps v Stock Roadmaster 8 v The wall Here It Is Crappies Speaker Pron leaing tower of pure audio chit like fat midget lesbian anal sex

you can do it either way, but it all depends on the weight of your mat/glass. really you dont want more than 3 layres of 8oz mat and 4 layres of 6oz cloth at one time. much more and it will be a huge pain to get the resin to saturate all layres with an acceptible ammount of resin. Edit: However, you can do one layre and as long as it is still completely wet (hasnt relaly begun to cure) you can do another and so on but still, you dont want to get too thick our the middle and bottom layres will take forever to cure completely.

Thanks

I must be loosing my mind...when i posted this i thought i was in the fabrication form....lol, oh well. no point in cross posting...

Want to learn how to fiberglass? check this tutorial out, he knows what he is doing. http://www.automotiveforums.com/vbulletin/...ad.php?t=416484

my insurance skyrockets in ust under 7 weeks...as i will be 16 with a license and i am going to be a 2ndary driver on my truck ...

if the sub plays below tuning or 1 octave above tuning it moves more than sealed of the same volume in most cases. however, you are right, around tuning ported doesnt move that much but it s a LOT louder. this is very evident in sine sweeps and steped tones...example: my audiobahns in my room (hehe) are tuned to around 30Hz and on a 20-80Hz sweep they will move a crap load at first, you can tell when they hit low 30's because the movment is reduced dramaticaly, and once it gets around high 40's low 50's it increases agian.

lol, if you live near me i could give you some memory or a processor or something... we salvaged over 3gig of memory if you combine it all. most of it 64 and 128

nope, only thing is it was salvaged from my dads shop being flooded last hurricane season... this was the only motherboard that survived... it was laying on its side on top of another computer and it came up, killed the hard drive and the cards but not the powersupply and the motherboard. but i need a better sound card...that POS is standard issue...it makes me wonder about what the SQ will be... the up sude is that i dont have to worry about and EQ...since i have one integrated...and i can keep the stock CD player because it will only be used for radio and when im too lazy to turn around and insert a CD into the computer. but most of the time i will just play mp3'since i rarely buy CD's anymore when ituned got them all beat...used to use Kazaa...untill i had to reformat and reload my OS like 4 times in a year.

some may laugh... but i am so happy, 30+ gigs of mp3 storage...and it was all FREE... Pentium III 833mHz but 768meg of ram cant wait to get it installed...

to you all AltERnator Componet Set...

What I Have: Stock Head Unit RE Componets Comming: Ava18 6cuft@~29Hz Hifonics BX1205D 1/0 Big 3 Profile HA600 To Be Decided: Head Unit (make keep stock just for radio, the carputer wil take car of CD's and mp3's) Carputer (to store lotta mp3) dampening (if needed for vibrations or just to increase sound clarity) Battery (if needed) Altinator (if needed)

cutting resistance in half will not yeild a 900w gain on that amplifier

hommie, i got LED's wired into my CF heat sink with the neon atachment on the side

that is all BS man...my monster cables sound so much better than the ones i solder....

you and mike over at AF :gayfight2:

Noah...STFU INTERNET FIGHT...AHHHHHHHHH