CBFryman

x2 My GF's friends are always IMing me asking how we are doing and chit. I can literally say "good, leave me the fudge alone" and they continue to IM me. Then they tell her and she female doges. Jesus.

Do you mean the fence is broken?? Thats simple, set it where you want and put a clamp on it. You don't need a anti-kickback, just know wtf your doing. Just take the guard arond the blade off, undo the nut and pull the balde off to replace it. <{POST_SNAPBACK}> The clamp it has works, but it doesnt completely lock down...its only good for 20" anyway. I like having anti kickback and blade guards...Safety > All and to change the blade you have to take the bottom off, sink the blade to fully shallow, then take the nut off and remove it. Ghey.

Homo

Was gonna start on my SPL enclosure today, but i dont feel like swapping out the blade in the circular saw... you practically have to take the damn thing apart. I asked my dad if i could have his old one and he said sure...The straight edgle clamp is partially broken (dont push too hard agianst it or you will end up with a crooked cut/jammed saw) and the blade is really rusty and dull and the blad guard is crooked to one side, one of the anti-kick backes is broken and the numbers are worn off for measing length.... but the motor still works and its nice and powerful... and free tools are free tools.

I voted twice for you, I'll vote with ym school's IP address first time i get a chance.

That is one hell of a passive Xover...

do whaa?

I'm almost sure that is the amp my GF's uncle uses, however he only claimed it did 10kw when he turned the regulator up to 17v.

No porblem on both parts. just cant wait to fire up these mach 5's. Got a new battery for my mic and recalibrated it last night.

Im too tired to go somewhere yet too awake to go to sleep. This friday = teh suck.

And what is the status on that sub and all?

Kent, Do you understand how I did it? I didnt physically pick up all three. One end was on the tail gate, the other on the ground. This means that the majority of the straight picking up 300lbs was a straight dead lift. The rest i had physics on my side as it was basically a giant heavy lever with the vulcrum being first at the tail gate and then at the wheel wells. Physics > all when loading chit. Ive yet to clean over 200lbs, jerk over 175, and I rep with 135. I usually do 3 sets of 10 reps...by the last set i am pooped.

the thing is you have to do it in class...and i'll probably need it for college anyway so im gonna bite the bullet and get one.

Ti-89 isnt even made anymore so i had to spring for the Ti-89t

The faster a forum moves the more idiot infested it gets (rule of thumb, not always true)... See ca.com

Supreme Pizza taste better cold IMO

I'm too hard headed to do that....lmao. 50 yards from the garadge to the car port? Hell why waste 2oz of gas.

Yeah, they arent that heavy, just akward when you have a 5'5'' arm spand tops. I usually lift them up, get under it, squat and grab it then lift it on to my back. That is how i cary them long distances by myself.

40.1 is avalable to a select few and you have to get in a LONG line to get one.

How much DOES a sheet of MDF weight? Cant be 100lbs, three sheets didnt feel but about like clean and jerking ~140lbs Then agian i had physics on my side.

Driving up there, buying a sheet, going home, then going back...3 times... easily 4 gallons of gas.

pick up one at a time, it is much easier. <{POST_SNAPBACK}> Gas is a female dog.

I walk in and grab a cart. I push it over to the MDF. I see some fat lard at a desk acting like he is doing something. I ask if he would help me with getting thee sheets of MDF down from 6 feet. He says he will call someone so I walk back over and wait. 5 minutes later nobody is there so I take each down, turning it 90 degrees and basically balenceing it and squating it down. I get all three down and I go to load them on the cart. Still no one there, just lard ass stareing at me like "wtf." I geuss it isnt every day a 5'5'' 150lbs frame kid does something like that. I walk back over and ask if he would just hold the cart still for like 2 min. He says somebody is on their way so I just go back over and go to work. I Lift each one on one at a time. Then I slide it as best i can, inch by inch, untill I can grab the card and the end of hte sheet at the same time. Then I basically do a butterfly. Then I go ask lard ass where the dust maskes are...he tells me the wrong place. So I am pushing this thing along and every time I have to stop I have to jerk it back like I am doing a Lat Row. I finally find the damn things and I go check out. I then get to the register and the lady checks me out and then I go to load them. I ask the watcher of these two guys loading cement into some guys truck if he would help me...He says he is busy. So I go out there and all three watch me stack these three sheetswith one end on the tail gate and the other on the ground. Then basically clean and jerk all three up, slide them forward over the wheel well humps, then hold them over my head and close the tail gate with my other hand. My worse experence at lowes...EVER.

I swear I just worked every muscle group I would work in the weight room just with different reps and no sets.