CBFryman

Yeah, the more i look at it the more and more i think that. Lawl at the plywood engine cover. ill start at $800...if he takes it as a lowball ill give him $1000 firm and he can take it or leave it. All this assumeing it runs well and the hull is in good shape.

Odd. I saw a video a while ago where NSX, Galliargo, Diablo, M5, GT3, and M3 wnet at it on the track. 1-2 finish lamborghini because of the decent corner capeability and raw power in the straights. Im leaning towards this I will have to go settle this in GT4

work from 12 to 4 then workign on making my car pass inspection <{POST_SNAPBACK}> <{POST_SNAPBACK}> x2 No inspections in FL

Formula...only company i can find with that name is formula yachts. odd. I read wrong. OMC=Original Manufacture?

http://adcache.boattraderonline.com/6/8/5/83322885.htm

Better be in pristine condition to be that old, and asking that kind of money. I have seen chriscraft's go for that kind of money. <{POST_SNAPBACK}> My dad's 29' chriscraft he just bought was $3500 in excelent condition. I might get some pictures one of these days. Where do you think i should start talking to him at. I dont plan on paying any more than $1300 even with a newer motor and decent trailer. <{POST_SNAPBACK}> I would start under a grand. Find a middle point you both agree on. I wouldn't go over 11-1200 depending upon condition. <{POST_SNAPBACK}> let me find you a link. Condition is so-so (judgeing form the pics which can make it look worse or better).

i have an IS2080 running the componet with the passive Xover.

Sounds like a driver issue . What drivers are you using ? How much power ? And how / where are they mounted ? <{POST_SNAPBACK}> RE 6.5" mids. Im hopeing these drivers im testing will be a big step up. IB in my doors. Stock location. <{POST_SNAPBACK}> Did you do any door treatments ? Dave edwards had the re's for a while in his doors. He had no problems at all with lack of midbass with them <{POST_SNAPBACK}> 1 layre of second skin on the door skin and 2 on the panel with overkill behind the speaker. of coruse they are trying to keep up with an ava18 wiht midbass...which might be my problem

Better be in pristine condition to be that old, and asking that kind of money. I have seen chriscraft's go for that kind of money. <{POST_SNAPBACK}> My dad's 29' chriscraft he just bought was $3500 in excelent condition. I might get some pictures one of these days. Where do you think i should start talking to him at. I dont plan on paying any more than $1300 even with a newer motor and decent trailer.

Sounds like a driver issue . What drivers are you using ? How much power ? And how / where are they mounted ? <{POST_SNAPBACK}> RE 6.5" mids. Im hopeing these drivers im testing will be a big step up. IB in my doors. Stock location.

Good to know. What is the optimal ratio? 1lb per cuft is what ive always heard. Less if you dont need it to "seem" as big and any more and you are just taking up space.

The guy is asking 1950 for it but im not going to pay that. It is on a galvanized trailer. Im thinking of offering 1200 and going from there if i like it when i look at it. Any thoughts?

I found a good looking boat. Im going to talk to my parents about it. It's a '67 run about hull with a newer motor (didnt say what year). Hasa shallow V hull so that is good for skiing/wakeboarding. Its a "beater boat" i geuss. It has one seat with a make shift wooden bench seat in the back. The hull looks like most Ski Natique boats in the 70's only its runabout instead of direct drive inboard.

But im lacking so much in the 60-100Hz area.

I thought of a good way to make ported door panels. Either seal them up like you would for IB then fill the bottom with expanding foam to reduce volume to tthe desired level. Then place a port in the door panel. Or mask off the window gears and make a fiberglass "bubble" around theopening for the speaker...hmmmm.

Limon-aid...i thought it might help...just made it worse. I always though heart burn was too much acid or acidic food sturing up the acid so it lapped agianst the esophogaus... that is what they say in the commercials

im thinking about starting at 1.0 then adding 2x4'to raise it. im thinking ported 0.5cuft@50Hz

Well a little better is better than no better. Starting on some 6.5" enclosures today. I dont know what Qts i should start with. Have any ideas?

Cant go wrong. Best stuff I've personally seen/used. But all i have to compare it to is dynamat.

woah! is she going to get tetanus?

good morning ramos. feeling any better?

Lets guess who cares? J <{POST_SNAPBACK}> Well me for one, almost $600. One more paycheck before school starts...im happy i wont be scrapeing change to drive to school.

on for you...and with this i am out

All i can tell you is there was a noticeable difference between just dampening and dampening + overkill (semiclosed neoprene foam). a little more midbass and a little more clear.

Its calmed down now........ALOT. J <{POST_SNAPBACK}> Good...glad to hear it. I never get heartburn but when i do i feel like making myself throw up hoping it will get all the acid out.