REVpuggie

my bad , misread the banner on the smd forum ...

my 306gti tops @ 157 mph I've been in Audi S6 BMW M3 Alpina tuned BMW M5 Masarati Spider Masatati Gibli biturbo jaguar xjs 6.2 v12 jaguar xkr Ferrari Testarossa Lambourgini Countach I only drove the M3 Alpina tuned

:bigclap: Steve Meade is getting his SMD subs today right ?????? so post specs !!!!!!!

some Drum&Bass to add to the list .... -Inertia 'A broken silence' -Evol Intent 'corrupt cops' -Technical Itch 'Deception' -Dj Crystl 'Warpdrive'

x3

apparantly noone is picking a build log .... I'll make a build log on my next build ......

Hi , got a multimeter ? measure one of the coils on resistance , measure the resistance of the cables on the multimeter first by putting the red and black pin together and subtract that resistance from what you measure on one of the coils , that should give you an answer on how to wire your sub .

Thanks for the possitive reactions guys ! :clap: I'd be happy to show one of these build logs ,butt you'll have to choose which , the Exodus subs are in pretty straight forward enclosures .I know the shiva is not meant for ported enclosures but I think simulated it gave a nice LOUD SOUND QUALITY curve for car-use . and I've only had a short try out but it sounded very tight and loud , I liked it a lot !(played the "far beyond driven" Pantera album) the Tempest got an 90 liter closed enclosure and did 141 db@55hz on a termlab , and thats not bad at all on 780 watts the cabinet for the boschmanns (I know its a crap brand) has not one screw in it exept to mount the woofers and has trapeze connected sides . a real streetpouder , the lower it plays the harder it gets to breathe . the SoloX cabinet has no screws in it as well , 7 triplex boards glued on top of each other under stress gives it an amazing rigidity , and the one-piece double flared port is under tension between the top plate and horizontal bracing . choose ....

Hi , Well I'm from The Netherlands , Car-Audio is a hobby of mine for over 10 years now , specifically the low end gets al lot of attention and I've made MANY sub enclosures . I drive a Peugeot 306 GTI-6 , a 10 year old hot hatch which crancks out about 200 Bhp out of its little 2-liter engine and revs up to 7200 RPM , no audio is running in it at the moment because I've been too busy building for others . here's a little pic of the car : maybe a few pics of stuff I made for friends Tempest-X on a Brax 2000x: Shiva-X on a Xetec P2 evo : 2 boschmann 15" Nuke's on a Beyma 3600 RL: the old soloX : I obviously made a lot more ...cant post em all