Kent535

Next Set Of Pics ! Got my roof deadened today. Before it sounded like a big piece of tin wobbling in the air, after the deadening was SUPER solid. A+ for Second Skin Enough talk, on to the pics. Before i started tearing it down. Getting ready to come off. Bare roof. Had some glue stuff attached but was no problem when it came time for the deadening. Had about a 1 inch gap between the roof and the bracing/steel structure that attached to the roof Down to my last 2 boxes This stuff is bulletproof ! Nice clean full box to start off with First deadening sheet applied !! How it looked when finished. Doubled Everything up. Some spots had Triple where overlapping occurred.

2nd Batch Of pics, Of The material. Well.... Most Of It more pics of new material used in the build will be seen in future Pics Quick Sketchup Of the Electrical. Dont think im planning on using the Solenoid Tho. General overview of the box setup Mr Bro and his GF 5 Sheets Ready to Go Upclose Wanted to go with Birch but it was $45 a sheet And i needed 5.. Basics to any build

First Set of pics ! pics of the 87 Mustang that everything will be going in... Rear Shot Side Shot Sexy Front Lights Soon to be HID angel Eyes How It looks Now before Back Seat gets Ripped Out

The 1987 Mustang Build Has Officially Has Begun ! Will start the Actual Build tomorrow. Will be getting some help by My bro ElBlako (Member Here on SSA) And maybe a cutie Will have pics up in a little bit of what i got today.

That Happened To Mine as i was taking backing out the scews to take the sub out of my enclosure. Stupid regular screws Thats why i will only use the + cross phillips head ones now. Anyway Mine however was about half an inch big i uses Ultra Clear superglue and put it back to normal and smoothed everything out barely noticable !!

My BTL is dual 2 and i have it wired to 1 ohm on the Amp right now.

Ok i thought cone area would make a difference. Just didnt know since the power would be cut in half and splitted between the two. Thanx rodney

I Have a fully loaded BTL 15" Running on an SAZ-3000D my question is will getting another one make that much more of a difference? since they will both be running off the same amp. Eventually i plan on getting another SAZ-3000D when money will allow but since i only have 1 3000D will sending 1200-1500 watts to each be louder than if i sent 2500-3000 watts to 1 ?

Ebay doesnt charge a fee if the listing does not sell. If it does a certain percentage of the selling price will be added to your "Monthly" listing fee

Go With The Daber 8's And give them a try Either Way The SA-8s are at the top of my list for small drivers !

Jesus Has Created Yet Another Masterpiece Looks Badass !

Me Too ! I Need One

Its a rat rod its suppose to be rusty outside and stuff like a sleeper car Nice car bro Looks Great!!

X2

Could Anyone link me to those 6X9 momos? Im looking for a set of 6X9's and i was thinking of trying these and writing up a review for you guys

How Much Did it set you guys back?

Thats one nice box i was looking more for a design like this...

Thanx, Ill be waiting For A Response. Anyone Else have Some Designs?

Have Everything Set Up For The New install just need a design for the box Im looking for A design for 2 15's Dual chamber roughly 10-11 Cubes with measurements Around These... Height - 20" Depth - 26 " Width - 49" the design im leaning toward is subs facing towards the back of the seat with port underneath each sub. 2 ports 1 for each chamber...

Yeah, my plan is to take out the back seat and make somewhat a half wall. batteries and amps in the trunk

Measurements For The Space I Have To Work With Are As Followed.... Height - 20" Depth - 26" Width - 49" What do you guys think i used a box calculation program off a website and if i remember right its somewhere between 10-11 cubes before port and sub displacement. So i should be starting soon. Just need a Box design.

Lets See Pics Of That Trunk. Id Like To See How Big Your Talking About When You Say "BIG"

Heres Some

I Bought These For My Setup , Yet To Be Installed Tho They Seemed Good Whats Bad About Them?