Lschevy

Lol he said it looks like a gun

Sundown z's its the regular sundown dustcap

Can I use some clear silicon?

When I opened my trunk this morning to let my lil bro look at my subs both of my dustcaps was off. Is that something I should be worried about?

Is there a way that i can test voltage drop with a digital multimeter

Two sundown z 15 with a saz-3500. 6 cube enclosure tuned to 33 hz

I got my subs installed......all I can say is WOW! I will try to get some vids up soon. Thanks jacob ur THE man

I have a strange problem with my hu...the remote and touch screen stop working but all the buttons on the hu itself is still working properly. what can be the problem?

this is the diagram i used to wire everything up. what diagram shows which wire is the remote wire?

I installed 90% of my system with the two batts in the back and i have a few questions. 1. my subs are dual 1 ohm can i wire each to .5 ohm from each terminal on the enclosure to have a end result of 1 ohm at the amp? 2. when grounding the two batts in the back and i ground them to and metal part or the car. (i have to ground them to each side of the trunk) 3. can i ground both batts on the same plane? 4. i put the two main fuses in just to see of the amp will turn on...no luck. does everything has to be grounded and connected before the amp turn on? 5. i attached the remote wire to the blue wire with the white line that's coming from the harness..is that good enough? 6. my hu have one sub out put but my amp have two do i run the"Y" to both "out put" connectors to one of the terminals on the rca's and the two "input" to the other terminal?

This is what happens when you get wood cut at home depot. I got all my cuts at home depot and some are 1/16 to short. they wasnt using the regular saw. i was wondering can i use some sealer tape for the cracks?

This is what happens when you get wood cut at home depot. I got all my cuts at home depot and some are 1/16 to short. they wasnt using the regular saw. i was wondering can i use some sealer tape for the cracks?

I was doing a dry build of sub enclosure yesterday and I decided to see how the kreg jig would work on some scraps. I wasn't able to find a bit long enough and small enough to pre drill and the wood split. My question is can I use"L" brackets instead and how good would they work? Second question what sealer to use? I'm not going to be able to seal the top panel because I will have to put my subs in when I put the front baffles on and I will not be able to get to the top inside corners what should I do?

Actually I dont know if I even need an eq for bass boost cause I didn't install my subs yet lol the way he was explaining it to me mad me want one. But 3500 watts to two z 15's I dout I will need anything else

What you mean by that

I meant I wanted one for the added bass boost. I know this might be a little crazy but I want it to go along with my sundown z's I dont think I will need it but after I was talking to a guy at work he said "with the boost from the hu and the eq the bass would be insane

I wanted an eq mainly for the added bad boost but after reading all you guys posts I see that it wouldn't help

Im thinking about getting a clarion eq., and I was Wondering if its worth the trouble? I've saw a lot of installs and I don't see to many running them.

Thanks

what is the cut out diameter or a sundown z 15?

where can i get a large "SUNDOWN AUDIO" rear window decal?

My buddy gave me an idea on how to mount my amp, but it will touching the batteries...will that harm anything when the amp is on?

so i will be alright running 3500 watts with this cca wire?