hondakilla98

I like you "lets see what happens" attitude. Since you added all that weight to the door panels. Are you adding any extra attachments from the door panel to the door itself? Maybe some screws or something? Are the speakers in a sealed enclosure on the door panel? Or do they vent into the doors?

Looking good. I like the last design. Any idea how the different firing and port directions will effect output?

The deck, power pack, parking brake bypass, sub rca's, sub remote and aswc-1 are installed. If only I could get the aswc-1 to work. I took out the back seat and all the trim from the b pillar back. Removed the factory "subs" from the rear deck. I cut the rivets holding the speakers behind the b pillar in to make room for subs, and put down some deadener. I'll post pics of the deck after I get this cleaned up. The Focal coaxials are wired and just need screwed down.

My deck showed up today. Tomorrow I'll get to work on clearing out my garage, so I have room to work on the car. I think I'll start the install with the deck, power pack, ASWC-1, and parking brake bypass. Hopefully in a few days.

The best part is the sound. I have had large tv's for a while, and I don't miss the low or high placed center channel. This AT screen material is awesome, and you don't see the large towers behind the screen. After the sub is done I'll enclose that whole end of the room. Here's what I have planned. Here's the sub box design

Peerless hds and fountek fr88ex sold.

Epson 8350 Projector Accousticaly transparent 105" screen Onkyo TX-SR608 Receiver Wharfedale Zaldek 2000 L R Wharfedale Zaldek Center Polk RC65i in wall speakers side and rear surround Velodyne 10" powered sub X2 HTPC PS3 Dedicated 20 amp circuit for the HT Flat dark paint on the walls and ceiling Blackout shade for the skylight Eventually I'll get to my sub build. I have an AA Avalanche 18 that'll be in 21 CU FT tuned @15 hz. Running on a Behringer EP2500 through a Behringer feedback destoyer pro. And get some better LCR speakers. It's hard to get good pics with my camera phone in a room that's normally really dark. I'll try to get some posted up. Here are the rear wall speakers and projector.

Looking forward to this. Your van box is one of my favorites.

Looking clean. I almost bought a roadmaster a few years ago, but they are hard to find clean and with the LT1 like yours. All that stereo and still more trunk space than most cars.

My friend Steve Mead told me to check it out. Been here since.

I can't edit this post. Boss amp sold.

My subs, mids, and power pack showed up today. Now I'm just waiting on the deck to arrive.

Here's my intake installed. I forgot to take a pic with the radiator cover on.

I installed a Vararam cold air intake, and removed the hood scoop plugs. I'll add pics later.

If they were still available I probably would've bought them. The SD-2's will make the install easier. I can go with a slightly thinner box. I ordered my ASWC-1 for steering wheel controls, and a parking brake bypass. I think I have everything i need on the way. After I clean up my garage I'll get a sheet of MDF to build the boxes.

If you want it to "look" lower, paint it gray. The black blends in and won't be noticeable. Maybe you can do something about the trim holes in your front bumper as well.

I have ccf, and deadener for that area. Any panels that get pulled will get ccf, the doors will get full treatment.

I forgot the paper with my user name. I'll post it up tomorrow. All items are in working order, see photos for condition. Prices do not include shipping. $70 pair of Peerless 830875 6-1/2" Nomex Cone HDS Woofers. Link with info. http://www.parts-express.com/peerless-830875-6-1-2-nomex-cone-hds-woofer--264-1092 $55 Fountek FR88EX 3" full range matched pair. Link with info. http://www.parts-express.com/fountek-fr88ex-3-neodymium-full-range-speaker-driver--296-719 $125 (ZED)Boss havoc REV-665 4 channel amp. Made in USA. New in box, never used. 85wrms x 4 @ 4 ohms at 12 volts, 180wrms x 4 @ 2 ohms at 12 volts, 190wrms x 2 bridged @ 4 ohms at 12 volts $125 each. 3 Sundown SA-8 V.2 D4. New in box. Bought for a project that never happened. Purchased from Jacob at Sundown. $175 Kenwood DDX-7019 double din touch screen DVD deck. This is currently installed and will be just the deck, harness, iPod and aux video cables.

I forgot the paper with my user name. I'll take one tomorrow on the same counter. All items are in working order, see photos for condition. Prices do not include shipping. $30 Alpine KTX-C10LP license plate frame rear view camera mount. Pictured with camera still mounted. Link with info http://www.crutchfield.com/S-TwWfrwsl1yt/p_500KTXC10L/Alpine-KTX-C10LP.html $80 Alpine HCE-C107D rear view camera for Alpine decks. Link with info. http://www.alpine-usa.com/product/view/hce-c107d/ $200 Alpine iXA-W407 double din media deck. Comes with everything but the remote. Has the PAC TR7 parking brake bypass, wiring adaptor for Ford still on main harness. Only issue I've had is, the Bluetooth sometimes won't connect to my phone. This is compatible with the pha-h100 crossover for an active front stage.Link with info. http://www.crutchfield.com/S-J4TCIUs10rD/p_500IXAW407/Alpine-iXA-W407.html $125 Alpine CDA-9886 head unit. This is complete with high speed iPod cable, remote, harness, cage and trim ring, box and manual. This is compatible with the pha-h100 crossover for an active front stage. Link with info. http://www.alpine-usa.com/product/view/cda-9886/ $50 Alpine PXA-H100 this is just the unit. No box, cable or power cord. Link with info. http://www.alpine-usa.com/product/view/pxa-h100/ $85 Alpine PXA-H100 complete with ai net and USB cables, 4 pin power plug, box and manual. http://www.alpine-usa.com/product/view/pxa-h100/ $20 Alpine KTX-H100. Never used. Link with info. http://www.alpine-usa.com/product/view/ktx-h100

Thanks.With help from forum member Lithium in my sub thread. I've settled on a pair of Sundown SD-2 D4 10's sealed in .5 cu ft. Edit. Subs ordered.

Thanks for the help. It looks like I'll be ordering a pair of SD-2 10 D4. My previous two setups were ported with a flat response. They were a little too heavy on the bottom end. Lately I've been enjoying the JL 12W6V2 sealed setup in my jeep. So I think I'll be happy with a sealed pair of tens in the GTO. Maybe I won't have fight trunk rattle for once!

I'm wondering if I put the sub in properly. So I used a tutorial from an HT forum and put the info in again. My first problem is Sundown doesn't list SD. Everything else seems fine except VAS, for some reason it calculates it at .06 L. Second problem is I'm not sure which type of crossover to select for the lowpass filter. Butterworth, linkwitz? I'm assuming I'll want to select 4th order. Third, how much of a difference will cabin gain make? I'm looking at .45-.5 cu ft net for each SD-2 10 D4. These will have as much power as they need, with 1500 rms available. Here's the graph with both input methods and thiele listed. And 4th order Butterworth @80hz filter on both.

Finding another set of IDQ10V2 is going to be a pain, mark that off the list. I modeled the TB 8's. I'm not impressed with the low end sealed, and I'm not going ported. Looked around at some other 8's, and I'm too cheap to pay for 4 quality 8's that work well sealed. So back to shallow 10's. Surprisingly I find sundown makes a "shallow" 10 that works sealed and likes small boxes. The SD-2 looks decent, but still a little lacking on the bottom end. Of course this is the first time I've modeled sealed subs, and I'm hoping I'm using WINISD correctly. Here's the graph.

I like the blue. Sounds like you've got plenty to keep you busy for now.