-
Whats THe Best Dampening Sound Suppressor???
I've used RaamMatBXT and I bought 100 sq.ft. of Fatmat off ebay a few months ago and installed some of it. Frankly, i'd rather pay the $120 for 60sq ft of raammat than the 100 sq ft of fatmat. the Raammat was a much better product.
-
Power Wire
sure... but its just a little bit unnecessary unless your running a shit ton of power.
-
Gran Turismo 3 / 4
Im about 30% through Forza Motorsport. It's a lot like Gran Turismo. But I beat the first one about 4 years ago
-
rls pics
agreed. the things I would do for a pair of those...
-
anyone want to help out a n00b with box design?
that looks like a sealed design to me BTW, I would like to have indented sides for this particular box. I suck at carpeting
-
anyone want to help out a n00b with box design?
I've been doing a lot of calculations and I came up with a somewhat finalized box using WinISD. As for being perfectly accurate, im not too worried about that, im not going for perfection, but my main goal here is flat response up until the lower frequencies, where I'd like to have a large peak. The thread that I linked you guys too earlier I entered using the wrong T/S Parameters, which is why I have a huge dip in the mid-high bass frequencies. 2 12" 2000SPL's 4.00 cu.ft @34hz 2 slot ports, 2.5" wide, 11" tall, 28" long +plenty of bracing I have a station wagon, so space and getting the box in is not a major concern, but I would like to keep the demensions around 36" width (necessary), 24" depth, and 14" hight Heres what the graph I came up with looks like: And the box will look something like this, subs facing up, ports facing back. Any opinions? comments? suggestions?
-
location of crossovers. Pics Included
I ran all my wiring (power, RCA, and speaker wire) on the left side of my car for some time. didn't get any noise at all. I decided to run the RCA's on the opposite side of the vehicle when I was re-wiring the system and didn't notice any difference.
-
0.6CF tuned to 24hz
why tune to a frequency that you can barely hear? IMO, bigger box, and raise the tuning a bit.
-
anyone want to help out a n00b with box design?
http://www.caraudio.com/vb/showthread.php?t=115401 I started a thread on CA.com, im trying to come up with a good box, and im not really too happy with the frequency response my 2000SPL's offer using WinISD. This being a more serious, on topic forum, does anyone have any suggestions or answers to the questions asked on that thread? feel free to post either here or on CA.com Thanks! Sergei
- Hey
-
AntiVirus
I can get you a fully free copy of Norton AntiVirus 2005, with the activation and everything included. I got mine off bearshare.
-
Happy Birthday Cobra65427289 !!!!!!!!
yay! lets for his birthday
-
cone hardly moves with 1000watts
my subs barely move at relatively loud listening volumes. If its loud enough for you, don't worry, its just an efficient set up.
-
Got metered yesterday
That rl-P is one sexy sub. Give it a good home in a nice-looking box, man!
-
I've got the blues
lol I get the same feeling everytime I do something new to the car. But i've always figured out a way to make it work!
SSS 18734
Members
-
Joined
-
Last visited