CrazyKenKid

no worries man! i am in the same boat and i ahve been looking for awhile also! and those are what i ahve found so far!!

http://www.caraudio.com/forum/showthread.php?t=441281 and http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250514970410&ssPageName=STRK:MEWAX:IT and http://cgi.ebay.com/Sundown-Audio-SAZ-2000D_W0QQitemZ180421134937QQcmdZViewItemQQptZCar_Amplifiers?hash=item2a01f00a59 and http://www.db-r.com/sell/store2/index.php?main_page=product_info&cPath=65_67_69_98&products_id=231 and even on SSA store!

NICE i love the box!! as for your port 2 should be fine or 1 6inch should work as well. the 2 4-inch give it some nice style maybe if you can fit 3 that would look better plus more port! lol!

ya 4 guage should be ideal but 1/0 would have been better. and yes it doesn't look THAT much bigger but really it is! http://www.powerstream.com/Wire_Size.htm so do yuo have another battery in the rear? or just off the front? (sorry if you answered this already) also have you tried swapping amps? jsut simply plug in any amp and hook the sub up to it and turn the volume down and if that amp goes into protect them you know somehting is up on your end but if it works then you know that something is wrong with the amp and you should pull the back off it and look for something out of the ordinary! also 2/0 and 4awg is HUGE differences lol!!

300-350=50$ more? lol 50$ hell you cna make that 50$ cash-o-la quick! maybe 2-5hours depending on how much you make per hour!! ;p

so back to the matter at hand! did you determine anything c0rrupted0ne? did you double check everything and or pull off the back of the amp? question what size wire are you using and fuse TYPE / AMPERAGE? ANL 150-200amp fuse? agu 80amp

are you interested in theoretical numbers? or real life numbers? and also at 1ohm will you be using it at a full 1200 nad at 2ohm a full XXXX and at 4ohm XXX?

lol that makes sense why it died lol!!

well either pull it out and take it to a shop and let them look at it! or maybe get a clamp meter and see what kind a amps it is out putting! if it is a constant amperage or if it is all over the place. other then that i knew when my alt was bad when i noticed my voltage on my batteries was all over the place and very low at full tilt! so i jsut got it replaced. but if you are already on your second alt and getting ready for a third....something isnt right there? my original alt lasted me about 200,000 click and my new one is still going strong nearly at 300,000 so ya. ( i got the car around 98,000 so if he did any work i don't know)

Waiting on jacob! lol The end of the month, and no amps, but I 'll wait because it will be worth it! But he did send me my 125.2 already! and trust me as soon as I get them you will see picture's! Because I'm going to gizz on them! lmao! gross

wow they are pretty light weight!

X2 on that! Raw ftw!

you aer looking for a flipout 7inch screen? i would say go with kenwood!!! or if you are really crazy get a JVC avx77!! it is a single din fullly touch screen (5.7inch) and it plays movie and has the best ipod control feature around! i know b/c i own one!!!

YA NO, this is SPAM

unless some hwo the gain got moved due to something rubbing up against it. or maybe something to do with the RCA's other then that you most likey jsut got used to it. i know with my setup there are days when it is on 10/50 and i am like wow this is loud enough then other days it is on 20/50 and i am like i can't hear it!! lol! but i am jsut going to say it is your ears playing tricks on you! and or going deaf

o wow 7hour install! must have been a small fortune lol! jk but for sure if he messed up the REM wire MAYBE that might be your issue! just take it back and get it all fixed up lol!! should be a simple fix if that is it! look on the bright side though at least the poor guy will know your car inside and out! lol!

well i would simply go bakc and say hey somethign is wrong here. have them do a trouble shoot since they installed it to determine your issue. first have them swap the h/u out with the same one so you don't have to rewire it and if that fix's it tell them why did my old one break? and maybe you will get a free h/u if it is there fault. but then agian i have never delt with any install shop i do all my own work so if i mess up somewhere i am to blame and it is all my fault! so in that way i learn from my mistake! but for sure take it bakc and say you guys did somehting now fix it! mabye tlk to a manager and tell them what is up and jsut maybe you will get something nice from them! lol! but wiat a day and see who else will chime in on this topic! also what is the model number of your h/u (head unit the alpine) but it kind a sounds like a setting to me. kind a like aux off or something like that. i am not 2 familiar with alpine but i got a buddy who loves those h/u i will ask him and see what he says about it. but i need to know your model number. and if best buy can't help you out give alpine a quick call and ask them when they recommend! and don't forget to repport back here with your findings!

o wwow that sounds like an odd issue. is there a RESET button on your h/u anywhere? i know for kenwood h/u whenever somethign screws up simply push the reset button and you are bakc up and running in no time! but your issue sounds like a bad h/u. maybe when it was removed somethign got crossed or somethign odd happened like someone dropped it. question who did the install in the car from the jeep? (who did the swap) a buddy a shop or yourself?

i remember seeing a good thread about this on this forum! so i looked it up! take a peek! and you tell us if they are any good!

It's not aluminum tinned or coated. That's completely different. 90% of CCA wire is aluminum. It's an aluminum wire with a thin coating of copper to help protect against oxidation. The sole purpose of doing it this way is to reduce the cost of the wire. There are no performance benefits...aluminum is simply a worse conductor than copper. hey thanks for clearing that up for me!! that make sense! thankyou very much! Kenneth

o ya the aluminum coating(tinned) lol! completely forgot about that. but doesn't that aluminum(tinned coating) actually have a practical use other then making the resistance higher?

i dont' no much actually i don't no a darn thing abuot power supplies! other then i have on my computer lol! jk!! but ya i do kno over 14.4-14.7 on any agm battery is bad and will lessen it's life (the battery that is) but hey if you wnat to do something stupid like put a 12volt battery at 16-18 volts lmao go fro it! other then that there is a little device called a MLA (missing link audio) it makes your alt put out move volts to better charge your batteries or so they cliam but i wouldn't use it b/c agm batteries aren't meant for over 14.4 (which is what most alts can charge at anyways) but if you are just a ground and pounding (mma fighter ) then i say don't worry to much about your keeping your batteries at 15volts if you ere heavy in the comp side then ya keep the voltage up and abuse the hell out of those batteries lol!! but for sure those are jsut my thoughts about it wait for some of the experienced guys to chime in! give a few more days!! they will they always do!

wiat you said you want to charge your batteries to 15volts...? why agm isn't suppost to be around 14.4-14.7 anything more and you risk damaging them i though? also keep in mind your alt can't top off your batteries! that is where a charger comes into play. and if you top of your batteries it is better for them anyways!!! (but i could be wrong i am no super battery expert, shizzzzon would know the best about this kind a thing i would say)

well stay away from those automatic ones! i currently own a SCHUMACHER SC-1200A 12V CHARGER 12/8/2 and ya i don't like it ihave to mess with it to charge my battery bank nearly every time! if you have have the EXTRA cash like 250-300 buy a batcap charger lol those are 5 stage chargers lol!! ya i know you wnat to keep cost down, as for the kinetik charger it is only like 100$ on ebay mabye more with shipping. i would say go with that once since you are using a bunch of kinetik anyways! plus that charger has a great feature called recondisioning (i think) which is suppost to extend the life of the battery at the cost of like 24hours of steady charging!! and when you look at it you jsut spend like X number of dollars on it so why not pay an extra 100$ to get the power end up to spec! and yes charging yoru batteries via a charger is the best way to TOP them off! your alt can't do that!

hey that makes sense why kicker is more flexible lol b/c ther was less strands lol!! and in yoru pic it illistates that really well! nice close up~! would you mind if borrowed that pic for a reference pic?