bigger_george

I grounded mine to the factory ground spot since it is less than a foot away from my battery. I just sanded off the paint on the spot as extra precaution

Well, it wasn't done today thanks to the stubborn firewall, but all is taken out and put together, ready to go in. except just figured out I was short on a RCA. may have to get one online and see if i can get a cheap grommet as well.

Thanks for the help; was a bit confused by the instruction manual.

My original idea was that it would allow someone to xover the rear and front mid and tweets and as for the subs, i have no idea what two sets would be for. Most of the ones I have dealt with have 3 sets and that's why i am a bit confused as to how to connect em.

I'm a little bit confused about how to wire the RCA's. They have basically 6 sets of preamp outputs with some labeled mid, highs but also some sets labeled positive and negative. The manual isn't too detailed about using the pro setup except to connect all of them. I am going to be running tweets and mids up front and mids in the back. Plus a sub(which it has 2 pairs of outputs to as well for some reason). I will post some pix if necessary. Thanks for any help you guys can provide. I'm trying to get this done tomorrow as i will be working til 10 pm tonight.

i am, cuz most ppl are stupid about setting amps. <{POST_SNAPBACK}> That is very true but doesn't work with audiophiles who like to fine tune their stuff tho' especially for the high end of the sound spectrum. Oh well that's what outboard eq's and crossovers are for right? B)

I've heard a couple in comps very impressive sound. I'm not a big fan of the chip crossover deal though except maybe for a sub amp.

I think I've heard 10%-15% of one's yearly salary is common.

How long does it usually take welding supply to ship? I ordered knukonceptz stuff the same day as welding supply(last thursday), but knukonceptz got it to me by saturday. Welding supply didn't even give me a tracking number

In sound? nah i haven't got my system in yet. The dash kit is supposed to ship to me very soon though and part of it should be finished by then and hopefully Jamie can finish the rest of it after this coming week.

Is this ok or a no-no? I just added 4 gauge wire in addition to the factory wire(wired it to the same spot and sanded paint off the ground) and replaced the factory battery terminal blocks with stinger ones.

yeah they're always high but u stilkl save a lot if u bid low.

http://www.ubid.com/actn/opn/getpage.asp?AuctionId=10449528 Just a heads up for their old subs B)

Very sweet, my bro is a Tc owner too. Setup is very clean and matching

I'm down for a group buy at the right price and right kind of amp

That would be my car. The subs are 2 RLp-15's in 2 cubes sealed each. Original ones with black cones. I must admit it is looking excellent, can't wait to see and hear the finished product.

25 here ...

ok ... sounds about right You scored as 90' Turbo Supra. You prefer speed and originality over anything else and have a good rep on the streets. 02' Xtreme Blazer 75% 90' Turbo Supra 75% 02' Mazda Miata 63% 00' Honda Civic 63% 64\' Impala 50% 05' Cobalt SS 50% 00' audi A4 50% Ford Focus ZX3 02' 50% 99' Mitsu Eclipse GSX 38% Trans Am 38% Aston Martin Vanquish 38% 91' Geo Storm 38% 87' Z28 Camaro IROC 25% 03' Mustang SVT Cobra 25%

Usher tweets can go a bit lower without probs so I'd say high pass em at something around 3 khz. Nice setup, i use usher speakers in my home.

very nice! How's the box size recommendation lookin for it? Small box or large box sealed/ported?

I got mine from the group buy. Nice setup, should sound good with some tweeking. I'm using a HT Vifa XT tweet for mine and the crossover built into the Eclipse HU.

The amp isn't for me; it's for my bro's fiancee's car. I am going to use my ol' RE 35.1D. They needed a cheap reliable solution that would be optimal for an older Mag D2 since the previous amp on it was a kicker dx700 and was only getting 350 watts. I also believe Concept is a decent brand though not near top of the line. Plus i got the Concept for real cheap.

maybe this one? http://www.ubid.com/actn/opn/getpage.asp?AuctionId=10374220

I also own a RE35.1D as well and bought it in pre-order(for only 250 cause their old database crashed ). Sometimes it is worth the gamble and as for adire, i would not hesitate either as they do have quite the know-how, and have been building amps(even though mainly for home) for a while now. It'll probably be a bit more expensive though if i know Dan's taste in using good parts.

Yeah i got it for good price offa ubid, all i can afford right now. That stand i got with it looks so well-matched too