Estsound

sorry but i would never seal 18" might wanna think some other subs or run them ported.

if im getting 4g wire between alt and battery, how big fuse i should use ?

I've seen a lot of topics about resistance so i decided to make topic about this to clear things up. There are 3 ways how to run your dual coil sub. 1) Series connection: you will wire your sub in series. If you connect in series you add resistance. 1+1=2 ohms 2+2=4 ohms 4+4=8 ohms 2) Parallel connection: Hook up your sub in parallel. Making your resistance lower. 1/1+1/1+1/2 = 0.5 ohms 1/2+1/2+1/1 = 1 ohm 1/4+1/4+1/0.5 = 2 ohms 3) Or you can run dual channel amp, 1 coil to 1 channel. Or run 2 amps one amp to one channel. I actually don't recommend this connection, because coils have to be powered equally, you need to make really accurate settings. Hope that this helps you guys !Pinned ?

You can wire 2x4 ohms to 2 or 8 ohms or run it @ 4 ohms with 2 channel amp or dual amps. 2x1 ohm will equal 0.5, 2 or 1 ohm. 2x2 ohms will equal 1, 4 or 2 ohms wiring dual coils in series is simple just add resistance 2+2=4 ohms wiring dual coils in parallel 1/2 + 1/2 = 1/1 it gives you 1 ohm

nice cat lol, awesome box man, keep up good work. def tuned in

Xcon

It's just a fresh amp smell Enjoy your product

it will still pound im running at 350W RMS and its pounding. It all depends of box you have, just try moving box around the trunk. If you dont want to get second batt, you might wanna buy new and bigger one to replace your current batt.

Step 2 of big 3, installed wire between battery and chassis. I didn't do third wire between alt and battery because i ran out of wire. By the way my battery is under back seat Hopefully ill get new wire soon, i also made all wire connectors by myself again. Voltage drop, i had 5 amp charger hooked up. Battery was half way charged. http://www.youtube.com/watch?v=kVFotm3H0HU Watch in HQ

thank you

damnnn.... that sux

omg...

tuned in

looks awesome

Well i decided to make start with big 3 today, i didnt have any wire connectors so i had to make my own ones. Here are some pictures of today Amp switch and HU in the dark. Charged my batt. Wire connector i made. First step of my big 3, added second wire between chassis and engine.

I will seal this box from the trunk, so everything will come into cabin. Next Week: New Enclosure for 2x12 "Big 3"

700

GOOD LUCK !

tuned in !

Nice box, this thing should hit

Fixed links

Here are some pics, i will update this topic.

http://www.youtube.com/watch?v=V_JjlB9bn-M Made this new video because i had to delete my old Youtube account.Watch in HQ

Hopefully next week, i have few days off school

designed my box today