thebiggmann12

i think the 2x4's are there just for bracing, outside or inside, they are used bc they are thick and strong so they wont flex.

o.p., check out the sundown nightshades

where r u located?

Ok when you get a new basket each of the screws that hold it down, should be 6 of them, should have a dab of CA glue holding them down, What i used was a 20g needle from walgreens and some paint thinner to break the glue down. you're going to want to use that and if possible an impact screwdriver, works like an impact wrench buy you use a hammer on it instead of an air compressor. I was told that you don't have to use CA glue to hold down the screws and that loctite or a similar product will work. lol i didnt go through all that trouble...there was ca glue on the bolts but i just used some muscle and they came right off.

who were u looking at? try ups or fedex. they are normally fairly cheap...ik fedex charged me 50 to ship my 10" bl.

lol...my car already has an intake exhaust and header. im not worried about speed...its a focus. i already have to get a recone either way with a new basket bc mine broke...i was just wondering how much output im going to lose. it would be nice to have my backseat back, but its def not a necessity.

alright, so i currently have an 18" nightshade that im getting reconed...i kinda wanna go with a 15 instead to shed some wait off of my car...its slow as shit as it is lol, so im wanting to go a bit smaller. how much output would i lose if i went to a 15. as long as the box is still just as good it shouldn't be a noticable difference right? any help would be great guys. thanx.

staying with the size i have but i have to get a new basket too.

this is a good post, for i am about to preform my first recone.

how long did u let the glue set?

i think if u get a 300 amp alt, and 3 big batts for the back, u should be fine..make sure u get a voltage meter, just so u know for sure. and with all this money in the setup, might wanna get a o-scope or at least find somebody who has one just to make sure ur not clipping.

get em all lol.

what were the technical difficulties?

looking good.

probably clipped it.

looks great!!!keep up the good work.

the saz is stable at higher voltages like 16v or 18v systems. u probably dont have that, so i would go with the 1200d. also, jacob has said himself that the sae1200d could be classified as a 1500 watt amp.

so ur port is 3" wide, from the top to the bottom of ur box and goes in 9"?

lol it happens to the best of us...at least u know what ur talking about, where as alot of people (myself included) have no idea about some of the questions that get posted on here.

not to take sides or show anybody up or nething, but he said lpf...not ssf.

the remote will not shut the amp off, but it will basically turn ur subs off.

welcome!

is the 6.5 b4 displacements or after? if its after displacements i would go with the 18. if not def go with the 15.

looks great!

lol aight no biggie. just hit me back whenever u get a chance.