Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

ive been lookin for a new amp lately, and ive wired it down to 2 amps which are the kicker zx1500.1 and the mtx ta81001. there both the same power (1500rms) but the kicker is @ 2ohms, and the mtx is at 1ohm.which amp will have the better quality, output etc. and scince the mtx amp is 1ohm, will it draw more amps then the kicker will at 2ohms??

  • 2 weeks later...

Ive got the Kicker in one of my vehicles and like it on a pair of SSD10s. Only issue with that amp is that the subsonic is preset to 25Hz and a shallow 12 dB/Octave. This is an issue if you are using a normal daily tuning in a ported setup (no issue to me since this ones sealed) Kicker is decently efficient, not sure about the other. Current draw for either amp isnt based off of the loads the amps are optimized for, but the output power at that load and the efficiency of the amp. You can have an 8 Ohm optimal amp that makes 2000W and is just as efficient as a 1 Ohm optimized 2000W amp... its 2000W/ 12 volts or whatever its running at/ %efficiency = current draw

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.