Im deciding between 2 fi Q 12s sealed, or 2 15 Qs sealed... If I went with the 15s I would be a little under the space per sub, but which do you guys think would be better to get?

What kind of power and room do you have to work with?

Thanks!

-Nick

What kind of power and room do you have to work with?

Thanks!

-Nick

Ill be using a

http://www.woofersetc.com/index.cfm?fuseac...;product_id=524

to power both the subs, so I have good power. And room... I dont have dimensions, but you can get an idea from here

http://www.subthump.com/acamarowell.htm

about 1.0 cu ft each with 2 12's sealed and around 1.6 with 2 15's sealed.

15s would be louder overall and you could lower the QTC some with about 1 lb of poly fill per cuft of enclosure... but the qtc still is too high for my tastes. Little too punchy.

12s in 1 cuft per would work well. That definitely is a solid amp that doesnt skimp on power. Probably about 1200W per sub. Should make for a very solid system.

Thanks,

Scott

Go for the 2 12"... They will make for an easier install and will actually have proper enclosure... If I remember correctly, Camaro's don't have room for a box the right size for a 15 to mount on them unless you have them tilted forewards like in those pics which would be a lot harder to make a box for than just 2 12" facing up....

Go for the 2 12"... They will make for an easier install and will actually have proper enclosure... If I remember correctly, Camaro's don't have room for a box the right size for a 15 to mount on them unless you have them tilted forewards like in those pics which would be a lot harder to make a box for than just 2 12" facing up....

yeah ive decided on the 2 12s, will be ordering in 2 weeks

Probably for the best... I know a chick who has a 12 in that little hole in the back of her camaro and there is not much room on the edge of the woofer so i dont think it would have been easy to make a box for a 15... And the work to do it would probably not be worth it since they would still be in too small of a box...