Alright i got 2 dvc 2 ohm subs i wired them just like option 2 on this graph so i can get a 2ohm load

http://www.rockfordfosgate.com/rftech/woof...mp;woofer_imp=3

and my DMM is reading 1ohm did i do something wrong?

NEW PICS! for everyone to double check!

the ohm reading changes from 1.7 - 2.0 though just keeps changing

Edited February 1, 200817 yr by SEC

Yes, you only wired 2 of the 4 coils up.

you need to wire the positive on one coil the the negative on the other coil not the same coil. Notice on the diagram that the wire goes across the woofer to the positive not to the one right next to it.

Unhook them and check each coil individually with your dmm. Make sure they read the correct impedance.

What Bromo said.

Edited February 1, 200817 yr by Duke

Alright i got 2 dvc 2 ohm subs i wired them just like option 2 on this graph so i can get a 2ohm load

http://www.rockfordfosgate.com/rftech/woof...mp;woofer_imp=3

and my DMM is reading 1ohm did i do something wrong?

O yea turn the subs so the voice coils are north and south and ull see what u did wrong...

ya thank you i figured it out! they read 2 ohms now! thanks!

yeah basically you just shorted out a coil on each sub.

post up pics of how it is now so it can be double checked.

new pics up!