Jump to content
View in the app

A better way to browse. Learn more.
SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

help with recone

daman
in General Fi

Featured Replies

Posted

alright so i just got my recone in for another one of my 18 btls i reconed them before but this time its diferent as you can see in the pic below it has 4 leads if thats what they are coming out the spiders on each side total of eight on each side how would i solder this on im use too just two on each side

qpjleh.jpg

Its a little fun getting all the leads into each terminal, but the BTL terminals do have larger holes than the standard ones. We twist and shove all 4 wires into each terminal... really technical terms there;)

Leave a slight bump (meaning dont pull them tight) for a slight bit of strain relief. Solder, and trim all the excess off the bottom.

A little tougher to get into the hole, but easier to get things right.

Let me know if I can help with anything else.

Thanks,

Scott

Go to topic listing

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.