Posted February 27, 200817 yr I'm looking to get either a Fi SSD 15, or an SSA Icon 15...Which ever one I get will be in a ported enclosure, tuned to ~30hz.What are the pros/cons for each of these subs, and how do they differ?Thanks in advance for the help.
February 27, 200817 yr They're almost the same sub as far as stats go. I've never heard an SSD, but I can vouch that the ICON is going to try and rip your face off at 30hz.
February 27, 200817 yr Its a coil toss.I say go for the the Icon tho. Edited February 27, 200817 yr by ford302redneck
February 27, 200817 yr Author Alright, thanks for the help so far. I'm coming from a 12" Alpine Type R, and I'm not really happy with the SPL. When I came across these, I realized how much better there is out there for reasonable pricing (rather than a $1000+ JL W7, which apparently these subs will kill anyway).Unfortunately, I will only be able to power these with 500-600 watts RMS for a while...A couple other things that I'm curious about... On the Fi, there are a few options that I don't understand. What is the advantage of the copper coil, or the flatwind coil?And coming from what you described above, what is the difference in the coils between these two subwoofers. Feel free to get technical if you want. Thanks for the help, I really appreciate it. Edited February 27, 200817 yr by Philanthro
February 27, 200817 yr Check out the FI section of this forum, and it tells you what each option does.
February 27, 200817 yr Author Check out the FI section of this forum, and it tells you what each option does.Aright, I found that section. Thanks.Anyone got any info on the difference between the coils on these subs, or any other differences I should be aware of?
February 27, 200817 yr Author Flat wind is more thermal power handling, Copper is more toward SQ.Alright, I will get the copper, since I'm not going to be feeding these more than 1kW ever...I'm still not clear on the difference on the Icon and the SSD. Someone mentioned the coils being different. Is this why the Icon is ~$60 more?
February 28, 200817 yr The ICON has a stiffer spider than the SSD and includes a 3" Copper Coil already. The ICON also has a triple slug motor where the SSD has a double. There isn't anyway in hell you can bottom an ICON out.
February 28, 200817 yr Author The ICON has a stiffer spider than the SSD and includes a 3" Copper Coil already. The ICON also has a triple slug motor where the SSD has a double. There isn't anyway in hell you can bottom an ICON out.Thanks for the clarification. All of those are good things to know.Since I will be running only 600 watts RMS for the first several months, do you think the SSD would do more with the amount of power I have, since the spider isn't as stiff?Thanks.
February 28, 200817 yr The spider on the ICON loosens up quite a bit. Then it gets really loud and low.Either one will be ok with that power as long as you don't clip it.
February 28, 200817 yr Author The spider on the ICON loosens up quite a bit. Then it gets really loud and low.Either one will be ok with that power as long as you don't clip it.Is it generally pretty obvious when you are sending a clipped signal to a sub? What I mean by this is can you hear the distortion? Because my old Kicker ZX400.1 would seem to just stop getting louder after about 1/2 gain, but raising it from 1/2 to full didn't make a distorted sound, it sounded like nothing changed.I don't have an oscilloscope, so I don't know how else I can properly set the gains. Everyone here says that DMM won't do the job right.
February 28, 200817 yr The DMM won't show the clipping, it'll still measure voltage fine. You should be able to hear clipping, unless you've got ears with downs syndrome.
February 28, 200817 yr Author The DMM won't show the clipping, it'll still measure voltage fine. You should be able to hear clipping, unless you've got ears with downs syndrome. Alright, thanks for the help.Do you know why my Kicker just stopped increasing its output, rather than putting out a clipped signal. Do they have some sort of anti-clip feature built in?
February 28, 200817 yr it's easily possible that you had your sub in a ported box with high group delay. Clipping sent to that type of install would be hard to hear.
February 28, 200817 yr Admin Also, some amp companies seem to have glorified gains. For example, my Orion 2500D, seems to reach near full gain at less then 1/3 on the knob.
February 28, 200817 yr Author it's easily possible that you had your sub in a ported box with high group delay. Clipping sent to that type of install would be hard to hear.I had it running a Type R, and it was in a sealed box.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.