Currently im running a 12" Q ported (2cu@32hz) off a saz-1500d. Im looking at trying to get more output but am limited on space. Im looking at the option of doing 2 SSD 12's sealed with 800wrms going to each. How would output compare to the Q ported? I have about 3 cubic ft to work with in a sealed box. I could also possibly do 2 10" SSDs ported but only in 2-2.5 cubes.

Any recommendations?

Why not try 12" Q in 2.5 cuft box?

I tried 2cuft and 2.5 and noticed a big difference in spl, and how low it got.

Why not try 12" Q in 2.5 cuft box?

I tried 2cuft and 2.5 and noticed a big difference in spl, and how low it got.

Mainly because i kinda want to do something different. Im not even sure i can squeeze 2.5 out ouf the space requirements i have. It would all depend on the port design.

Let me rephrase the question. How would 2 12" SSDs in a 2-2.5 cube sealed box compare to 1 12"Q 2cubes at 32hz i have now.

That's a toss up, I'd say about the same output, but a much smoother frequency response due to the sealed box.

That's a toss up, I'd say about the same output, but a much smoother frequency response due to the sealed box.

x2.

You might gain in spl, may lose.

you did 2 12's in 2.5^3 box?

i have one 12 ssd in that, dont think i can fit another in there......

you did 2 12's in 2.5^3 box?

i have one 12 ssd in that, dont think i can fit another in there......

He meant sealed.

you did 2 12's in 2.5^3 box?

i have one 12 ssd in that, dont think i can fit another in there......

He meant sealed.

I have 1 ported in 2 cubes. Im thinking about doing 2 sealed in 2-2.5

Right now, im having another box built for the Q first, then ill decide what to do.