Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

Hi,

First post here.. Looking for some help on purchasing..

I've decided on the BTL series, 18s.. I'm slightly limited on cubic space, unless I go hog wild (which is still possible) and I figure with the minimums for both being 5 cubic feet that I might as well go for the higher end (Unless the new BTLs have a different minimum, then I may have to rethink this.). I do think I am leaning more toward a daily driver, as the vehicle IS my daily driver.

The first question is with regards to ohms. I've never done a 1 amp to 1 speaker configuration so I'm confused. The amp is an Audiobahn A2200HCX amp. I will be using one to power each speaker. The amp is listed as being 1 ohm stable, but the manual for some reason doesn't list a 1x speaker configuration, though it does say that it is bridgeable. A manual for a later version of the amp (for the A2200HCT) does list a 1x config. To better explain, here's the specs from the A2200HCX manual:

INTO 4 OHMS @ 12.5V DC 2 x 200W

INTO 2 OHMS @ 12.5V DC 2 x 400W

INTO 1 OHMS @ 12.5V DC 2 x 800W

and heres the A2200HCT:

INTO 4 OHMS @ 12.5V DC 2 x 200W

INTO 2 OHMS @ 12.5V DC 2 x 400W

INTO 1 OHMS @ 12.5V DC 2 x 800W

INTO 4 OHMS @ 12.5V DC 1 x 400W

INTO 2 OHMS @ 12.5V DC 1 x 800W

INTO 1 OHMS @ 12.5V DC 1 x 1600W

The 2x configs are the same, so is it safe to thing that the 1x's may also be the same, or is this a wrong thing to assume?

And to further complicate, based on the two scenarios above.. Which would be the better way to go?

A. Dual 1 Ohm, wire each voice coil to left / right of the amp,

B. Dual 2 Ohm, wire in parallel, bridged on amp, hope for best.. (This should be a 1 Ohm load correct?)

C. Some other unthought of option..

Thanks for any info.. After this I may have some box questions as well. :)

D`Arvit Reehmicks

oh god not audiobahn... man do yourself a huge favor and sell that amp and buy you a decent amp..your getting a great sub here..its like having a $150k sports car that puts out 600hp and your filling it up with 87 octane regular..to be nice has i can..that amp is crap bro

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.