I will be building my first custom box for a Fi Q15. I will be putting it in a 1994 Toyota Camry. The cargo space is 14.9 cuft, I will edit my post later knowing the actual dimensions I know there are a lot of experts on this forum that can give me some helpful advice on how to prepare the box and how to correctly brace it.

I have used a layout generator online and I was wondering if these dimensions were suitable for it.

Net Volume: 3.3 cubic feet

Tuning Frequency: 32 Hz

Port Width: 4.75 inches

Port Area: 78.375 Square Inches

Port Length: 55.25 inches

External Dimensions: 28 wide x 18 tall x 26.75 deep.

Color Count Width Height

Top/Bottom 2 28 inches 26.75 inches

Red 1 22.5 inches 16.5 inches

Yellow 1 26 inches 16.5 inches

Black 1 26.5 inches 16.5 inches

Green 1 26.75 inches 16.5 inches

Teal 2 20.5 inches 16.5 inches

Violet 1 0 inches 16.5 inches

Heres the original link to it. http://www.subwoofertools.com/forum/port.....mp;Fs=&CE=0

I would take any modifications to my build to help me construct it. FYI my set up is a Fi Q15 @1ohm powered by a Autotek SS1500.1D. I am looking more for LSQ but I want to go ported.

Port is waaaaaaaaaaaaaaaaaaaaay too long...no clue why it'd tell you to make one that long.

I'll get you a design later tonight, shoot me some max dimensions to work with within the vehicle.

Thanks!

-Nick

Port is waaaaaaaaaaaaaaaaaaaaay too long...no clue why it'd tell you to make one that long.

I'll get you a design later tonight, shoot me some max dimensions to work with within the vehicle.

Thanks!

-Nick

60(Wide)x19(Height)x41(Deep)

Its about 14.9cuft according to the specs.

Bump.

Anyone help?